Can superabsorbent polymers be used as rheology modifiers for cementitious materials in the context of 3D concrete printing?

Autogenous shrinkage may be a critical issue concerning the use of limestone-calcined clay-cement (LC3) in high-performance concrete and 3D printable cementitious materials, which have relatively low water to binder (W/B) ratio. Adding an internal curing agent, i.e., superabsorbent polymer (SAP), could be a viable solution in this context....

Fresh properties of limestone-calcined clay-slag cement pastes

Formulation of quaternary blended system containing ordinary Portland cement or clinker, slag, limestone and calcined clay (LC2) appeared to be a viable approach to developing low-clinker cements without severely sacrificing mechanical performance at later ages. This paper investigates the effect of two material parameters, i.e., LC2-to-slag...

Fresh and hardened properties of self-compacting concrete containing recycled fine clay brick aggregates

Clay brick is one of the major components of demolition waste, which is generally landfilled. Effective and new uses of recycled clay brick may provide sustainability benefits in terms of landfill reduction. Therefore, this research aims at applying Recycled fine clay brick aggregates (RFCBA) with sizes from 0.075 mm–4.75 mm to prepare Self...

An experimental and numerical investigation of coarse aggregate settlement in fresh concrete under vibration

Fresh concrete needs vibration to compact, fill the mould and reach a dense state. During the compaction process, coarse aggregates (CAs) tend to settle, affecting the homogeneity and eventually the long-term durability of hardened concrete. In this study, a 3-D, multi-phase numerical model for fresh concrete is developed for better...