Shear Experiments of Prestressed Concrete Bridge Girders

For the assessment of existing slab-between-girder bridges, the shear capacity and failure mode are under discussion. Previous research showed that the static and fatigue punching capacity of the slabs is sufficient as a result of compressive membrane action. The girders then become the critical elements. This research studies the shear capacity...

Torsion Design Example: Prestressed Concrete Girder Bridge

The design of a cast-in-place, post-tensioned concrete, multi-cell box girder bridge under combined torsion, shear, and flexure is presented in this example. The bridge covers three spans of different lengths, supported by two abutments and two bents; its cross-section consists of three 12 ft (3.7 m) lanes, two 10 ft (3.0 m) shoulders, and two...

Shear or bending? Experimental results on large t-shaped prestressed conrete beams

Experimental results of four shear tests on two large prestressed concrete beams are compared to nonlinear analysis and design code calculations. The beams have a length of 12 m and a depth of 1.3 m and are reinforced with stirrups and pre-tensioning. The four tests consist of a single point load at a distance of 2.7d from the support. A priori...