Short-circuit characteristics of superconducting permanent magnet generators for 10 MW wind turbines

Superconducting permanent magnet generators (SCPMGs) are a potential candidate for 10 MW direct-drive wind turbine applications. This paper presents two 10 MW SCPMG designs using MgB<sub>2</sub> cables for the armature winding and investigates the short-circuit characteristics of the designed SCPMGs. The first part...

Design Considerations and Short-Circuit Characteristics of Fully Superconducting Wind Turbine Generators

Compared with partially superconducting generators, fully superconducting generators (F-SCGs) can further increase the torque density in large direct-drive wind turbine applications. Design trends of F-SCGs intend to increase the electrical loading by applying superconducting wires and boost the current density in the armature winding to meet...

Performance of Multi-Layer and Stator-Shifting Fractional-Slot Concentrated Windings for Superconducting Wind Turbine Generators under Normal and Short-Circuit Operation Conditions

High temperature superconducting (HTS) generators are being considered for large offshore direct-drive (DD) wind turbines as they are expected to be lightweight and compact. However, short circuit torques of an HTS generator with integral-slot distributed windings (ISDWs) are too high for wind turbine constructions, mainly due to the large...

Design challenges of direct-drive permanent magnet superconducting wind turbine generators

In recent years, permanent magnet superconducting (PMSC) generators have become a candidate for applying superconducting (SC) generators in large direct-drive wind turbines. This configuration keeps the SC armature winding and its cooling system stationary and eliminates rotational cooling couplings. However, the low excitation by permanent...

Increasing the Feasibility of Superconducting Generators for 10 MW Direct-Drive Wind Turbines

In recent years, superconducting synchronous generators (SCSGs) have been proposed as an alternative to permanent magnet synchronous generators (PMSGs). They are expected to reduce the top head mass and the nacelle size for such large wind turbines. In 2012, the INNWIND.EU project initiated this research to investigate SCSGs for 10-20MWdirect...

Short Circuits of a 10 MW High Temperature Superconducting Wind Turbine Generator

Direct drive high temperature superconducting (HTS) wind turbine generators have been proposed to tackle challenges for ever increasing wind turbine ratings. Due to smaller reactances in HTS generators, higher fault currents and larger transient torques could occur if sudden short circuits happen at generator terminals. In this paper, a finite...

Short Circuits of a 10 MW High Temperature Superconducting Wind Turbine Generator

Direct drive high temperature superconducting (HTS) wind turbine generators have been proposed to tackle challenges for ever increasing wind turbine ratings. Due to smaller reactances in HTS generators, higher fault currents and larger transient torques could occur if sudden short circuits happen at generator terminals. In this paper, a finite...

Modelling and Transient Analysis of a 10 MW Superconducting Wind Turbine Generator

The number of installed wind turbines is growing every year as the need for energy increases in an exponential manner. As the wind turbines are trying to fulfill these requirements, the demand for output power from each individual turbine is increasing as well. Although this is great, implementation of new technologies such as direct drive...

Design study of a 10 MW MgB2 superconductor direct drive wind turbine generator

A superconducting direct drive generator based on field windings of MgB2 superconducting tape is proposed as a solution by mounting the generator in front of the blades using a king-pin nacelle design for offshore turbines with power ratings larger than 10 MW as investigated in the INNWIND.EU project.