Virtual Impedance Control for Load Sharing and Bus Voltage Quality Improvement

This paper proposes a virtual impedance reshaping strategy to share active and harmonic power while promoting the PCC voltage quality. Moreover, the suggested method is resilient to cyber-attacks and immune to communication interruption and delay. Furthermore, it significantly reduces the communication burden. Experiments verify the...

A Gradient-Descent Optimization Assisted Gray-Box Impedance Modeling of EV chargers

Extracting an electric vehicle (EV) charger's input impedance with the analytical model (white-box approach) or the frequency sweep (black-box approach) is limited by the parameter confidentiality or the measurement noise, respectively. To overcome these challenges, a gradient-descent (GD) optimization-based gray-box modeling approach is...

Hybrid Space Vector Modulation Scheme for the Multiport Hybrid Converter

This work proposes a hybrid space vector modulation (HSVM) scheme for multiport hybrid converters (MHCs). Moreover, the impact of shifting the auxiliary currents from the main ones is proposed and investigated in order to enhance the converter efficiency. The proposed operational schemes have been implemented in a three-phase 5 kW MHC...

Hybrid Si/SiC Switch Modulation with Minimum SiC MOSFET Conduction in Grid Connected Voltage Source Converters

In this article, a hybrid Si/Si carbide (SiC) switch (HyS) modulation with minimum SiC MOSFET conduction (mcHyS) is experimentally characterized, so as to derive its conduction and switching performance. These are later used to derive a silicon (Si) area analytical model for the HyS configuration. The chip area model is used to benchmark the...

Carrier-Based Modulated Model Predictive Control for Vienna Rectifiers

The implementation of traditional finite-control-set model predictive control (FCS-MPC) with variable switching frequency in voltage source rectifiers (VSRs) can make the system suffer from poor current harmonics performance. In fact, the resulting wide-spread voltage harmonic generated at the AC terminals makes the design of the typical multi...

Model Predictive Control for the Reduction of DC-link Current Ripple in Two-level Three-phase Voltage Source Inverters

In the applications of three-phase two-level voltage source inverters (VSIs) relatively large energy storage capacitors are used to absorb the high DC-link current ripples mainly caused by the circulating reactive power, the switched AC phase current flowing to the DC-link, and other dynamic and/or asymmetric operating conditions. Especially for...

LCL Filter Design for Three Phase AC-DC Converters Considering Semiconductor Modules and Magnetics Components Performance

LCL filters are commonly adopted to attenuate the current harmonics produced by Pulse Width Modulation (PWM) Voltage Source Converters (VSC). Due to the nature of LCL filters, several combinations of L and C can deliver the attenuation required by the standards. The optimal configuration is generally evaluated, considering power density, costs,...

A Fast Protection of Multi-terminal HVDC System Based on Transient Signal Detection

HVDC technologies are widely acknowledged as one of solutions for the interconnection of renewable energy resources with the main electric power grid. The application of the latest modular multi-level converter (MMC) makes power conversion much more efficient. Due to the relatively low impedance in a DC system, DC fault currents may rise to an...

Optimized Control of LCL-VSC Converter With Refined s-Parameter

For the control of high-voltage dc (HVdc) systems, especially for that of the multiterminal HVdc (MTdc) systems, the voltage source converter (VSC) is a good option because of its high controllability. These days, different types of VSC converters have been realized such as the two/three level converter and modular multilevel converter....