Grouped People Counting Using mm-wave FMCW MIMO Radar

The problem of radar-based counting of multiple individuals moving as a single group is addressed using an mm-wave multiple-input-multiple-output (MIMO) frequency-modulated continuous wave (FMCW) radar. This problem is challenging because the different individuals are closer to each other than the range/azimuth resolution, and their bulk...

ALK-PE: An efficient active learning Kriging approach for wave energy converter power matrix estimation

Wave energy is considered one of the most potential renewable energy. In the last two decades, many wave energy converters (WECs) have been designed to harvest energy from the ocean. Different power take-off systems are developed to maximize the power generation of WECs. However, the estimation of the power matrix of the WECs and annual power...

Wave Breaking Induced by Opposing Currents in Submerged Vegetation Canopies

Wave height attenuation in vegetation canopies is often all attributed to the drag force exerted by vegetation, whereas other potential dissipation process is often neglected. Previous studies without vegetation have found that opposing currents can induce wave breaking and greatly increase dissipation. It is not clear if similar process may...

Sea state estimation based on vessel motion responses: Improved smoothness and robustness using Bezier surface and L1 optimization: Improved smoothness and robustness using Bézier surface and L1 optimization

Floating structures oscillate in waves, where these wave-induced motions may be critical for various marine operations. An important consideration is thereby given to the sea states at the planning and operating stages for an offshore project. The most important information extracted from a sea state is the directional wave spectrum,...

Effects of Wind-Wave Misalignment on a Wind Turbine Blade Mating Process: Impact Velocities, Blade Root Damages and Structural SafetyAssessment

Most wind turbine blades are assembled piece-by-piece onto the hub of a monopile-type offshore wind turbine using jack-up crane vessels. Despite the stable foundation of the lifting cranes, the mating process exhibits substantial relative responses amidst blade root and hub. These relative motions are combined effects of wave-induced monopile...

Beam and phase distributions of a terahertz quantum cascade wire laser

We report on both measurements and simulations of the beam profile and wavefront of a single-mode, 3.5?THz quantum cascade wire laser, incorporating a lateral corrugated metal-metal waveguide, 3rd-order distributed feedback grating. The intrinsic wavefront was measured by using a Hartmann wavefront sensor (HWS) without any optical components...

Hot electron bolometer heterodyne receiver with a 4.7-THz quantum cascade laser as a local oscillator

We report on a heterodyne receiver designed to observe the astrophysically important neutral atomic oxygen [OI] line at 4.7448?THz. The local oscillator is a third-order distributed feedback quantum cascade laser operating in continuous wave mode at 4.741?THz. A quasi-optical, superconducting NbN hot electron bolometer is used as the mixer. We...

Frequency and amplitude stabilized terahertz quantum cascade laser as local oscillator

We demonstrate an experimental scheme to simultaneously stabilize the frequency and amplitude of a 3.5 THz third-order distributed feedback quantum cascade laser as a local oscillator. The frequency stabilization has been realized using a methanol absorption line, a power detector, and a proportional-integral-derivative (PID) loop. The amplitude...

Terahertz heterodyne spectrometer using a quantum cascade laser

A terahertz (THz) heterodyne spectrometer is demonstrated based on a quantum cascade laser (QCL) as a local oscillator (LO) and an NbN hot electron bolometer as a mixer, and it is used to measure high-resolution molecular spectral lines of methanol (CH3OH) between 2.913–2.918 THz. The spectral lines are taken from a gas cell containing methanol...