Introduction: Preterm infants’ growth is typically monitored through weight, body length (BL) and head circumference (HC). However, 3D cranial volume (CrV) is considered a more accurate indicator of brain growth than 2D HC. The PreemieScanner is a novel 3D measuring device that simultaneously measures BL, HC and CrV. Its clinical usability was tested in a simulated NICU setting. Materials and methods: Three extremely low birth weight (ELBW; BW < 1,000 gram) dolls with Optiflow breathing systems, (tubes positioned either at the front or back of the head) were used. Nurses conducted scan sessions and marked anatomical landmarks on 3D PreemieScanner images. As control, nurses measured HC manually with a standard measuring tape. Key outcomes were: (1) Measurement success rate, (2) Precision—percentage within clinically allowed limits, ±0.4 cm for BL, ±0.3 cm for HC, ±12 ml for CrV, and 3) accuracy—mean or median measurement error (MME) relative to the ground truth. Results: Thirty-five scan sessions resulted in 100% successful measurements for BL and HC; 80% for CrV. BL MME −3.3% (p < 0.001); 40% (42/105) within precision limits. HC MME (Optiflow-front) 0.0% (p = 0.63); 89% (51/57) within limits. HC MME (Optiflow-back) −0.4% (p = 0.91). 93% (43/46) within limits. MME HC measuring tape, (Optiflow-front) −0.8% (p < 0.001), 88% (50/57) within limits, and MME (Optiflow-back) −1.1% (p < 0.001), 83% (40/48) within limits. MME CrV (Optiflow-front) −1.8% (p = 0.01), 86% (31/36) within limits, MME CrV (Optiflow-back) −1.3% (p < 0.001), 98% (45/46) within limits. Conclusions: The PreemieScanner is a reliable, comprehensive device for measuring BL, HC and CrV in ELBW infants. It integrates smoothly into routine care with minimal disturbance. HC measurements demonstrated higher accuracy and precision than traditional tape method. CrV measurements, with 93% within precision limits, can be regarded as acceptable, enabling development of CrV growth reference charts, enhancing clinical growth monitoring.

Background: Compliance with the recommended 30 s drying time of alcohol-based hand rub (ABHR) is often suboptimal. To increase hand hygiene compliance at a neonatal intensive care unit (NICU), we installed an Incubator Traffic Light (ITL) system which shows ‘green light’ to open incubator doors after the recommended drying time. Aim: To measure the impact of this visual feedback system on NICU healthcare professionals' compliance with the recommended ABHR drying time. Methods: Ten traffic light systems were installed on incubators at a NICU, five of which provided visual feedback, and five, serving as a control group, did not provide visual feedback. During a two-month period, the systems measured drying time between the moment of dispensing ABHR and opening the incubator's doors. The drying times of the incubators were compared with and without feedback. Findings: Of the 6422 recorded hand hygiene events, 658 were valid for data analysis. Compliance with correct drying time reached 75% (N = 397/526) for incubators equipped with visual feedback versus 36% (N = 48/132; P < 0.0001) for incubators lacking this feature. Conclusion: The ITL improves compliance with the recommended 30 s ABHR drying time in a NICU setting.

Introduction Growth monitoring of preterm infants is essential for assessing the nutritional effects on their growth. The current growth monitoring techniques are too stressful, however, for the smallest preterm infants. We performed a systematic review to summarize studies on stress-free techniques for measuring the body size of preterm infants inside incubators other than the traditional calliper and tape measure-based instruments. Methods We searched four online literature databases: Embase, Medline, Web of Science Core Collection, and Cochrane, using search terms related to patients (neonates, infants, children) and body size measuring techniques. By means of expert judgement we assessed the techniques’ suitability for stress-free body size measurement of an infant lying in an incubator. As a criterion for suitability, we used an imaginary ideal technique. Results Twenty-six studies were included in this review. In 24 studies, the technique for body size measurement was related to 3D technology, and the majority of these studies acknowledged clinical superiority of 3D over 2D data. Two 3D techniques were assessed as suitable for stress-free measurement of preterm infants inside incubators. The first technique used a commercially available 3D handheld scanner which needed 3D postprocessing to derive measurement data. The second technique used a self-developed stereoscopic vision system. Conclusions 3D volumetric parameters have higher clinical value for growth monitoring than 2D. In addition, contactless 3D measurements enable stress-free growth monitoring of even the smallest preterm infants. However, the time-consuming 3D postprocessing challenges the usability of 3D techniques. Regrettably, none of the identified suitable 3D techniques met all our requirements of an ideal all-in-one body size measuring technique for extreme preterm infants. Handheld 3D scanning might have the best properties for developing this ideal technique.