Building technologies employed today in 2nd and 3rd world countries are imported, expensive, outdated and unsustainable. Highly developed countries, on the other hand, rapidly advance in developing affordable, numerically controlled and robotically supported material- and energy-efficient methods for building on demand. The research team proposes to close this gap by applying advanced design-to-robotic-production (D2RP) technologies developed at Technical University Delft (TUD) to construction problems in 2nd and 3rd world countries. The provided tool base uses refurbished robotic technology, which is retrofitted with state-ofthe-art open source control software, and by employing local approaches and available materials the dependency on imported materials and processes is drastically reduced. The D2RP unit is coupled with the electricity generating Kite Power (KP) system developed at TUD to create a mobile sustainable autarkic unit that can be deployed everywhere.@en

Robotic Building implies both physically built robotic environments and robotically supported building processes. Physically built robotic environments consist of reconfigurable, adaptive systems incorporating sensor-actuator mechanisms that enable buildings to interact with their users and surroundings in real-time. These robotic environments require Design-to-Production and -Operation (D2P&O) chains that may be (partially or completely) robotically driven. This chapter describes previous work aiming to integrate D2RP&O processes by linking performance-driven design with robotic production and user-driven building operation.@en

Design to Robotic Production (D2RP) establishes links between digital design and production in order to achieve informed materialization at an architectural scale. D2RP research is being discussed under the computation, automation and materialization themes, by reference to customizable digital design means, robotic fabrication setups and informed materialization strategies implemented by the Robotic Building group at Hyperbody, TU Delft.@en

This paper discusses the development of an informed Design-to-Robotic-Production (D2RP) system for additive manufacturing to achieve performative porosity in architecture at various scales. An extended series of experiments on materiality, fabrication and robotics were designed and carried out resulting in the production of a one-to-one scale prototype. In this context, design materiality has been approached from both digital and physical perspectives. At digital materiality level, a customized computational design framework is implemented for form finding of compression only structures combined with a material distribution optimization method. Moreover, the chained connection between parametric design model and robotic production setup has led to a systematic study of certain aspects of physicality that cannot be fully simulated in the digital medium, which then establish a feedback loop for underrating material behaviors and properties. As a result, the D2RP system proposes an alternative method of robotic material deposition to create an informed material architecture.@en