The design of high-precision motion stages, which must exhibit high dynamic performance, is a challenging task. Manual design is difficult, time-consuming, and leads to sub-optimal designs that fail to fully exploit the extended geometric freedom that additive manufacturing offers. By using topology optimization and incorporating all manufacturing steps (printing, milling, and assembly) into the optimization formulation, high-quality optimized and manufacturable designs can be obtained in an automated manner. With a special focus on overhang control, minimum feature size, and computational effort, the proposed methodology is demonstrated using a case study of an industrial motion stage, optimized for maximum eigenfrequencies. For this case study, an optimized design can be obtained in a single day, showing a substantial performance increase of around 15% as compared to a conventional design. The generated design is manufactured using laser powder-bed fusion in aluminum and experimentally validated within 1% of the simulated performance. This shows that the combination of additive manufacturing and topology optimization can enable significant gains in the high-tech industry.@en

In the design process of high-precision motion stages, the dynamic behavior is of paramount importance. Manual design of such a stage is a time-consuming process, involving many iterations between engineers responsible for mechanics, dynamics and control. By using topology optimization in combination with additive manufacturing, post-processing using traditional machining and parts assembly, it is possible to arrive at an optimal design in an automated manner. The printing, machining, and assembly steps are incorporated in the optimization in order to directly arrive at a manufacturable design. With a motion stage demonstrator optimized for maximum eigenfrequencies, it is shown that combining additive manufacturing and topology optimization at industry-relevant design precision is within reach and can be applied to high-performance motion systems.@en