M.B. Gaggero
info
Please Note
<p>This page displays the records of the person named above and is not linked to a unique person identifier. This record may need to be merged to a profile.</p>
7 records found
1
The integration of bacteria-based self-healing mortars has emerged as a promising solution to address repair due to recurring cracks and preserving masonry durability. Building upon a recent pilot study demonstrating the efficacy of a self-healing agent in the repair of masonry made with cement-based mortar, this follow-up study explores the potential of integrating the added-in healing agent in a pre-bagged cement-lime mortar - more commonly used in masonry applications. Through bond wrench tests and a 30-day healing period involving wet-dry cycles, the study evaluates aesthetic and flexural bond strength recovery of couplets built with solid clay bricks. Results showed that the addition of the agent altered the initial flexural bond strength, with bacteria-based masonry couplets four times stronger than the plain reference ones - without containing the agent. The mortar’s colorwas also affected. Additionally, bacteria-based specimens demonstrated automatic repair, restoring up to 33% of the original flexural bond strength, while referencemasonry couplets showed no evidence of autonomous healing. However, instances of leaching, possibly attributed to the agent’s substrate, prompted a revision of the strategy employed for the healing environment. Further research will specifically target the observed leaching issue by exploring the effects of multiple healing environments.
...
The integration of bacteria-based self-healing mortars has emerged as a promising solution to address repair due to recurring cracks and preserving masonry durability. Building upon a recent pilot study demonstrating the efficacy of a self-healing agent in the repair of masonry made with cement-based mortar, this follow-up study explores the potential of integrating the added-in healing agent in a pre-bagged cement-lime mortar - more commonly used in masonry applications. Through bond wrench tests and a 30-day healing period involving wet-dry cycles, the study evaluates aesthetic and flexural bond strength recovery of couplets built with solid clay bricks. Results showed that the addition of the agent altered the initial flexural bond strength, with bacteria-based masonry couplets four times stronger than the plain reference ones - without containing the agent. The mortar’s colorwas also affected. Additionally, bacteria-based specimens demonstrated automatic repair, restoring up to 33% of the original flexural bond strength, while referencemasonry couplets showed no evidence of autonomous healing. However, instances of leaching, possibly attributed to the agent’s substrate, prompted a revision of the strategy employed for the healing environment. Further research will specifically target the observed leaching issue by exploring the effects of multiple healing environments.
Within the context of light damage to unreinforced masonry structures, recent tests have shown that the cracking behaviour of calcium-silicate brick masonry walls makes them more vulnerable to in-plane loads when compared against fired-clay brick walls. To further explore this observation, four nominallyidentical walls have been tested. Two of the specimens (3m wide and 2.7m tall) were built with calcium-silicate bricks and twowith fired-clay bricks. Additionally, two boundaries were compared: a top cantilever boundary, and a doubled-clamped configuration. The quasi-static, in-plane, two-way cyclic tests imposed small (0.03 to 0.1%), repeated drifts on the walls to investigate the initiation and propagation of small cracks. To monitor the cracking behaviour, high resolution Digital Image Correlation was applied. At the end of the tests, large drifts up to 2% were exerted to compare the near-collapse behaviour of the walls. The tests revealed that thewalls with the more restrictive boundary, deforming mostly in shear, behaved the stiffest and also developed cracks earlier than the cantilever walls. Additionally, this constraint also led to more vertical cracks that split bricks, while the cantilever walls saw more horizontal and diagonal cracks along mortar joints and at mortar-brick interfaces. While the calcium-silicate-proved to be more brittle than the fired-clay masonry for the cantilever test, the claymasonry exhibited similar brick-splitting cracks in the double-clamped configuration. In general, there were fewer but wider cracks in the calcium-silicate specimens, while the clay brick samples showed less localisation and more smeared-crack behaviour. In terms of stiffness, the calcium-silicate walls were initially stiffer and achieved a higher capacity. Moreover, these walls also presented a higher hysteresis associated with more frictional failures. In sum, while cracks on the calcium-silicate walls were confirmed to be more serious, their increased stiffness could lead to smaller drifts during dynamic loading, and the walls would develop less damage; this requires further study.
...
Within the context of light damage to unreinforced masonry structures, recent tests have shown that the cracking behaviour of calcium-silicate brick masonry walls makes them more vulnerable to in-plane loads when compared against fired-clay brick walls. To further explore this observation, four nominallyidentical walls have been tested. Two of the specimens (3m wide and 2.7m tall) were built with calcium-silicate bricks and twowith fired-clay bricks. Additionally, two boundaries were compared: a top cantilever boundary, and a doubled-clamped configuration. The quasi-static, in-plane, two-way cyclic tests imposed small (0.03 to 0.1%), repeated drifts on the walls to investigate the initiation and propagation of small cracks. To monitor the cracking behaviour, high resolution Digital Image Correlation was applied. At the end of the tests, large drifts up to 2% were exerted to compare the near-collapse behaviour of the walls. The tests revealed that thewalls with the more restrictive boundary, deforming mostly in shear, behaved the stiffest and also developed cracks earlier than the cantilever walls. Additionally, this constraint also led to more vertical cracks that split bricks, while the cantilever walls saw more horizontal and diagonal cracks along mortar joints and at mortar-brick interfaces. While the calcium-silicate-proved to be more brittle than the fired-clay masonry for the cantilever test, the claymasonry exhibited similar brick-splitting cracks in the double-clamped configuration. In general, there were fewer but wider cracks in the calcium-silicate specimens, while the clay brick samples showed less localisation and more smeared-crack behaviour. In terms of stiffness, the calcium-silicate walls were initially stiffer and achieved a higher capacity. Moreover, these walls also presented a higher hysteresis associated with more frictional failures. In sum, while cracks on the calcium-silicate walls were confirmed to be more serious, their increased stiffness could lead to smaller drifts during dynamic loading, and the walls would develop less damage; this requires further study.
Innovative Application of Self-Healing Technology to Masonry
A Proof of Concept
Cracks represent a prevalent form of damage in masonry structures, posing not only aesthetic concerns but also compromising structural durability; therefore, they are undesirable and need to be repaired. The repointing technique is traditionally implemented in this context, especially in historical masonry. However, this method fails to provide a long-term solution, leaving structures vulnerable to future damage. The paper investigates the applicability of a bio-based self-healing mortar to enable autonomous repair of masonry. This innovative mortar, developed to repair concrete structures, was implemented to explore the capacity of couplets to recover their original bond capacity and aesthetic aspect after multiple damaging events. Specimens built with calciumsilicate and clay bricks were subjected to subsequent cracking cycles using a crack-mouth-opening -displacement controlled bond-wrench test. Experimental results showed that self-repair, in terms of bond restoration and aesthetic filling of cracks, occurs even after multiple cracking cycles when the bio-based mortar is used with both types of bricks, optimizing the autogenous healing (intrinsic) of cement-based mortars. The effectiveness varied also according to the types of brick and healing environment used, e.g. under humid conditions (RH ~ 95%), 50% vs 80% of the original capacity was regained in fully separated couplets made respectively with clay and calcium-silicate bricks.
...
Cracks represent a prevalent form of damage in masonry structures, posing not only aesthetic concerns but also compromising structural durability; therefore, they are undesirable and need to be repaired. The repointing technique is traditionally implemented in this context, especially in historical masonry. However, this method fails to provide a long-term solution, leaving structures vulnerable to future damage. The paper investigates the applicability of a bio-based self-healing mortar to enable autonomous repair of masonry. This innovative mortar, developed to repair concrete structures, was implemented to explore the capacity of couplets to recover their original bond capacity and aesthetic aspect after multiple damaging events. Specimens built with calciumsilicate and clay bricks were subjected to subsequent cracking cycles using a crack-mouth-opening -displacement controlled bond-wrench test. Experimental results showed that self-repair, in terms of bond restoration and aesthetic filling of cracks, occurs even after multiple cracking cycles when the bio-based mortar is used with both types of bricks, optimizing the autogenous healing (intrinsic) of cement-based mortars. The effectiveness varied also according to the types of brick and healing environment used, e.g. under humid conditions (RH ~ 95%), 50% vs 80% of the original capacity was regained in fully separated couplets made respectively with clay and calcium-silicate bricks.
Bacteria-based self-healing agent for masonry repair
Applicability to cement-lime mortars
In the pursuit of introducing bacteria-based self-healing mortar for masonry repair, this study examined the potential of incorporating a poly-lactic acid (PLA) agent—already established in concrete repair—into cement-lime mortars, typical of historical constructions. Testing prisms constructed with varying lime/cement ratios revealed decreased flexural and compressive strength in high-cement-concentration mortars upon the addition of the agent; for mortars with high lime concentration, however, the agent led to an increase in both strengths. Furthermore, the agent's potential to self-repair was confirmed by allowing the remaining portions of tested samples to heal under humid conditions. Irrespective of mortar composition, cracks were resealed thus confirming the aesthetic, and potentially watertightness, restoration.
...
In the pursuit of introducing bacteria-based self-healing mortar for masonry repair, this study examined the potential of incorporating a poly-lactic acid (PLA) agent—already established in concrete repair—into cement-lime mortars, typical of historical constructions. Testing prisms constructed with varying lime/cement ratios revealed decreased flexural and compressive strength in high-cement-concentration mortars upon the addition of the agent; for mortars with high lime concentration, however, the agent led to an increase in both strengths. Furthermore, the agent's potential to self-repair was confirmed by allowing the remaining portions of tested samples to heal under humid conditions. Irrespective of mortar composition, cracks were resealed thus confirming the aesthetic, and potentially watertightness, restoration.
Innovative solutions for seismic-retrofitting existing structures are currently required, as often traditional strategies are expensive, non-reversible, highly invasive, and/or fail to address both serviceability and ultimate limit states together. The present paper describes a preliminary experimental campaign performed at TU Delft to investigate an innovative structural glass window for strengthening masonry buildings. To this purpose, a prototype composed of a timber frame, a semi-rigid adhesive, and a 20 mm thick structural glazing layer was designed. The prototype aimed to improve the structure’s behavior against minor but more frequent service vibrations (SLS), as well as against ultimate ones (ULS). Specifically, an increase in the structure’s in-plane capacity and stiffness was targeted to reduce cracking at low drifts/displacements, while at larger drifts, the adhesive’s tearing and timber crushing were used to activate damping. To evaluate the prototype’s performance, a quasi-static, cyclic, in-plane test on a strengthened full-scale wall was performed and compared with available data on a similar, yet unstrengthened, wall. Although the benefits were not pronounced in terms of cracking and energy dissipation, the implementation of the proposed strategy provided an increase in terms of initial stiffness (18%), force capacity (8%, 36%), and ductility (220%, 135%). This outcome provides the ground for numerical studies that will help better delineate the proposed strategy and improve the current design.
...
Innovative solutions for seismic-retrofitting existing structures are currently required, as often traditional strategies are expensive, non-reversible, highly invasive, and/or fail to address both serviceability and ultimate limit states together. The present paper describes a preliminary experimental campaign performed at TU Delft to investigate an innovative structural glass window for strengthening masonry buildings. To this purpose, a prototype composed of a timber frame, a semi-rigid adhesive, and a 20 mm thick structural glazing layer was designed. The prototype aimed to improve the structure’s behavior against minor but more frequent service vibrations (SLS), as well as against ultimate ones (ULS). Specifically, an increase in the structure’s in-plane capacity and stiffness was targeted to reduce cracking at low drifts/displacements, while at larger drifts, the adhesive’s tearing and timber crushing were used to activate damping. To evaluate the prototype’s performance, a quasi-static, cyclic, in-plane test on a strengthened full-scale wall was performed and compared with available data on a similar, yet unstrengthened, wall. Although the benefits were not pronounced in terms of cracking and energy dissipation, the implementation of the proposed strategy provided an increase in terms of initial stiffness (18%), force capacity (8%, 36%), and ductility (220%, 135%). This outcome provides the ground for numerical studies that will help better delineate the proposed strategy and improve the current design.
Innovative Application of Self-healing Technology to Masonry
A Proof of Concept
Cracks are one of the most common expressions of damage in masonry structures. Aside from aesthetic issues, they can compromise the overall behaviour of the structure; therefore, they are undesirable and need to be repaired. The repointing technique is traditionally implemented in this context, especially in historical masonry. Nevertheless, future damage is not prevented and may arise again, thus requiring renewed repointing interventions. The paper describes a preliminary study conducted at Delft University of Technology to investigate the applicability of the innovative self-healing technology to enable an automatic repair of masonry cracks. A bacteria-based self-healing mortar, developed to repair existing concrete structures, was implemented to explore the capacity of couplets to recover their original strength and aesthetic aspect after multiple damaging events. Specimens built with calcium-silicate and clay bricks were subjected to subsequent cracking cycles using a crack-mouth-opening-displacement controlled bond-wrench test. Experimental results showed that self-repair, in terms of strength restoration and aesthetic filling of cracks, occurs even after multiple cracking cycles when the self-healing mortar is used with both types of bricks, optimizing the autogenous healing of cement-based mortars. In this context, the healing effectiveness tended to decrease as the crack width and the number of cycles increased. The effectiveness varied also according to the types of brick and healing environment used, e.g. under humid conditions (RH ~ 95%), 50% vs 80% of the original capacity was regained in fully separated couplets made respectively with clay and calcium-silicate bricks. This outcome provides the ground to delineate the remaining testing campaign.
...
Cracks are one of the most common expressions of damage in masonry structures. Aside from aesthetic issues, they can compromise the overall behaviour of the structure; therefore, they are undesirable and need to be repaired. The repointing technique is traditionally implemented in this context, especially in historical masonry. Nevertheless, future damage is not prevented and may arise again, thus requiring renewed repointing interventions. The paper describes a preliminary study conducted at Delft University of Technology to investigate the applicability of the innovative self-healing technology to enable an automatic repair of masonry cracks. A bacteria-based self-healing mortar, developed to repair existing concrete structures, was implemented to explore the capacity of couplets to recover their original strength and aesthetic aspect after multiple damaging events. Specimens built with calcium-silicate and clay bricks were subjected to subsequent cracking cycles using a crack-mouth-opening-displacement controlled bond-wrench test. Experimental results showed that self-repair, in terms of strength restoration and aesthetic filling of cracks, occurs even after multiple cracking cycles when the self-healing mortar is used with both types of bricks, optimizing the autogenous healing of cement-based mortars. In this context, the healing effectiveness tended to decrease as the crack width and the number of cycles increased. The effectiveness varied also according to the types of brick and healing environment used, e.g. under humid conditions (RH ~ 95%), 50% vs 80% of the original capacity was regained in fully separated couplets made respectively with clay and calcium-silicate bricks. This outcome provides the ground to delineate the remaining testing campaign.
The brick-to-mortar bond often represents the weakest link leading to cracking and failure of masonry structures. For this reason, the in-situ characterization of masonry’s flexural bond behaviour (here defined as flexural bond strength and flexural bond fracture energy), is essential for the assessment of existing buildings. Among masonry bond properties, the flexural bond strength is commonly determined on-site, given the minimal invasiveness of the so-called bond wrench test. However, often the reliability of the results is questioned inputting their large variability to the operator. The present study discharges this assumption by comparing the accuracy of various testing set-ups (manually-operated vs computer-controlled set-ups). Additionally, the influence of the specimen’s type (with/without head joints and couplets vs wallet) on the flexural bond strength assessment is studied providing preliminary correlation factors that can be of help for the in-situ measurement on single-wythe masonry. In addition, to obtain a complete description of the bond behaviour, a new test set-up able to determine the post-peak response is presented. Considerations regarding the dissipated bond fracture energy and its relation to the tensile fracture energy are provided with the support of literature data.
...
The brick-to-mortar bond often represents the weakest link leading to cracking and failure of masonry structures. For this reason, the in-situ characterization of masonry’s flexural bond behaviour (here defined as flexural bond strength and flexural bond fracture energy), is essential for the assessment of existing buildings. Among masonry bond properties, the flexural bond strength is commonly determined on-site, given the minimal invasiveness of the so-called bond wrench test. However, often the reliability of the results is questioned inputting their large variability to the operator. The present study discharges this assumption by comparing the accuracy of various testing set-ups (manually-operated vs computer-controlled set-ups). Additionally, the influence of the specimen’s type (with/without head joints and couplets vs wallet) on the flexural bond strength assessment is studied providing preliminary correlation factors that can be of help for the in-situ measurement on single-wythe masonry. In addition, to obtain a complete description of the bond behaviour, a new test set-up able to determine the post-peak response is presented. Considerations regarding the dissipated bond fracture energy and its relation to the tensile fracture energy are provided with the support of literature data.