Cardiovascular diseases are a leading cause of mortality, with limited possibilities for transplantation due to a critical shortage of donor hearts. Replacing the heart with total artificial hearts (TAHs) remains challenging, due to size constraints and energy requirements, among others. To address this, we introduce the LIMO heart, a compact TAH concept based on an efficient soft fluidic transmission system. By reducing actuator volume and enhancing energy transfer, LIMO enables a more compact and efficient design. We developed a soft ventricle prototype using thin-walled pouch actuators that achieve transmission ratios above one via circumferential shrinkage. A fast, cost-effective prototyping method accelerated testing. Experimental results showed high energy transfer efficiency (82 to 91%), and in vitro tests demonstrated promising cardiac outputs of 5.9 liters per minute against aortic pressure and 7.6 liters per minute against pulmonary pressure. These findings represent a step toward a more broadly applicable biventricular soft robotic TAH for treating end-stage heart failure.

Background: Ablation strategies targeting fractionated or low-voltage potentials have been widely used in patients with persistent types of atrial fibrillation (AF). However, recent studies have questioned their role in effectively representing sites of conduction slowing, and thus arrhythmogenic substrates. Objectives: The authors studied the relationship between local conduction velocity (CV) and the occurrence of fractionated and/or low-voltage potentials in order to identify areas with critically slowing of conduction. Methods: Intraoperative epicardial mapping was performed during sinus rhythm. Unipolar potentials with an amplitude <1.0 mV were initially classified as low-voltage and potentials with ≥3 deflections as fractionation. A range of thresholds were also explored. Local CV was computed using discrete velocity vectors. Results: A total of 319 patients were included. Fractionated, low-voltage potentials were rare, accounting for only 0.36% (Q1-Q3: 0.15%-0.78%) of all atrial sites. Local CV at sites with fractionated, low-voltage potentials (46.0 cm/s [Q1-Q3: 22.6-72.7 cm/s]) was lowest compared with sites with either low-voltage, nonfractionated potentials (64.5 cm/s [Q1-Q3: 34.8-99.4 cm/s]) or fractionated, high-voltage potentials (65.9 cm/s [Q1-Q3: 41.7-92.8 cm/s]; P < 0.001). Slow conduction areas (CV <50 cm/s) could be most accurately identified by using a low voltage threshold (<1 mV) and a minimum of 3 deflections (positive predictive value: 54.2%-70.7%), although the overall sensitivity remained low (0.1%-1.9%). Conclusions: Sites with fractionated, low-voltage potentials have substantially slower local CV compared with sites with either low-voltage, nonfractionated potentials or fractionated, high-voltage potentials. However, the strong inverse relationship between the positive predictive value and sensitivity of a combined voltage and fractionation threshold for slowed conduction is likely to complicate the use of these signal-based ablation approaches in AF patients.

Background: Maintaining balanced left and right cardiac outputs in a total artificial heart (TAH) is challenging due to the need for continuous adaptation to changing hemodynamic conditions. Proper balance in ventricular outputs of the left and right ventricles requires a preload-sensitive response and mechanisms to address the higher volumetric efficiency of the right ventricle. Methods: This review provides a comprehensive overview of various methods used to balance left and right ventricular outputs in pulsatile total artificial hearts, categorized based on their actuation mechanism. Results: Reported strategies include incorporating compliant materials and/or air cushions inside the ventricles, employing active control mechanisms to regulate ventricular filling state, and utilizing various shunts (such as hydraulic or intra-atrial shunts). Furthermore, reducing right ventricular stroke volume compared to the left often serves to balance the ventricular outputs. Individually controlled actuation of both ventricles in a pulsatile TAH seems to be the simplest and most effective way to achieve proper preload sensitivity and left–right output balance. Pneumatically actuated TAHs have the advantage to respond passively to preload changes. Conclusion: Therefore, a pneumatic TAH that comprises two individually actuated ventricles appears to be a more desirable option—both in terms of simplicity and efficacy—to respond to changing hemodynamic conditions.