Mimicking the locomotive abilities of living organisms on the microscale, where the downsizing of rigid parts and circuitry presents inherent problems, is a complex feat. In nature, many soft-bodied organisms (inchworm, leech) have evolved simple, yet efficient locomotion strategies in which reciprocal actuation cycles synchronize with spatiotemporal modulation of friction between their bodies and environment. We developed microscopic (∼100 μm) hydrogel crawlers that move in aqueous environment through spatiotemporal modulation of the friction between their bodies and the substrate. Thermo-responsive poly-n-isopropyl acrylamide hydrogels loaded with gold nanoparticles shrink locally and reversibly when heated photothermally with laser light. The out-of-equilibrium collapse and reswelling of the hydrogel is responsible for asymmetric changes in the friction between the actuating section of the crawler and the substrate. This friction hysteresis, together with off-centered irradiation, results in directional motion of the crawler. We developed a model that predicts the order of magnitude of the crawler motion (within 50%) and agrees with the observed experimental trends. Crawler trajectories can be controlled enabling applications of the crawler as micromanipulator that can push small cargo along a surface. @en

In an era of globalized trade relations where food and pharmaceutical products cross borders effortlessly, consumers face counterfeit and deteriorated products at elevated rates. This paper presents multifunctional, biodegradable hydrogel microparticles that can provide information on the authenticity and the potential deterioration of the tagged food or pharmaceutical formulations. These microparticles integrate spatially patterned authenticity code with two sensors—the first one detects possible presence of pathogenic microbes through monitoring pH while the second one identifies products stored above optimal temperatures via optical monitoring of the microparticle degradation. Particles are synthesized from a biocompatible polymer and a photoinitiator, dextran modified with 2-hydroxyethylmethacrylate and riboflavin, respectively, using a continuous, high throughput method stop-flow lithography. The proposed synthesis approach also enables crosslinking with visible light bringing about additional flexibility to flow lithography. Model liquid and solid food and pharmaceutical products are successfully labeled with microparticles and the functionality of the sensors in aqueous solutions is demonstrated.@en

Transient assembled structures play an indispensable role in a wide variety of processes fundamental to living organisms including cellular transport, cell motility, and proliferation. Typically, the formation of these transient structures is driven by the consumption of molecular fuels via dissipative reaction networks. In these networks, building blocks are converted from inactive precursor states to active (assembling) states by (a set of) irreversible chemical reactions. Since the activated state is intrinsically unstable and can be maintained only in the presence of sufficient fuel, fuel depletion results in the spontaneous disintegration of the formed superstructures. Consequently, the properties and behavior of these assembled structures are governed by the kinetics of fuel consumption rather than by their thermodynamic stability. This fuel dependency endows biological systems with unprecedented spatiotemporal adaptability and inherent self-healing capabilities. Fascinated by these unique material characteristics, coupling the assembly behavior to molecular fuel or light-driven reaction networks was recently implemented in synthetic (supra)molecular systems. In this invited feature article, we discuss recent studies demonstrating that dissipative assembly is not limited to the molecular world but can also be translated to building blocks of colloidal dimensions. We highlight crucial guiding principles for the successful design of dissipative colloidal systems and illustrate these with the current state of the art. Finally, we present our vision on the future of the field and how marrying nonequilibrium self-assembly with the functional properties associated with colloidal building blocks presents a promising route for the development of next-generation materials.@en

The ability of cells to respond to external stimuli, by up and down regulation of genes, is a key strategy for survival in changing environmental conditions. Models based on equilibrium statistical mechanics have been able to successfully predict in vivo fold changes in gene expression by computing weights of configurational states of the promoter where genes can be expressed. These models are based on the same, perhaps unintuitive, assumption that transcription initiation - an inherently nonequilibrium process - can indeed be effectively described by the equilibrium binding of transcription factors (TFs) and polymerases to the promoter. The few earlier studies that independently test this assumption [P. H. von Hippel, Proc. Natl. Acad. Sci. USA 71, 4808 (1974)10.1073/pnas.71.12.4808], were published before much of our modern day understanding of molecular biology was established, and their models fail to explain more recent experimental results. As such, it is not obvious that the original conclusions remain valid. Equilibrium models depend on fitted free energy differences between binding of TFs to specific operator sites versus nonspecific DNA. In this article we compare the fitted binding free energy of the well-studied LacI repressor to equilibrium binding constants measured in independent in vitro experiments. To make this comparison we take into account the distribution of binding energies of the transcription factor to the nonspecific DNA, and we adjust LacI binding constants to a common set of physiological conditions. We find that the fitted binding energies of the LacI repressor in vivo indeed agree with in vitro measured equilibrium binding constants, reestablishing the idea that equilibrium statistical mechanical models of transcriptional regulation should be viewed not merely as mathematical tools, but also as informative physical representations of underlying TF-DNA interactions.@en

Fuel-driven assembly operates under the continuous influx of energy and results in superstructures that exist out of equilibrium. Such dissipative processes provide a route toward structures and transient behavior unreachable by conventional equilibrium self-assembly. Although perfected in biological systems like microtubules, this class of assembly is only sparsely used in synthetic or colloidal analogues. Here, we present a novel colloidal system that shows transient clustering driven by a chemical fuel. Addition of fuel causes an increase in hydrophobicity of the building blocks by actively removing surface charges, thereby driving their aggregation. Depletion of fuel causes reappearance of the charged moieties and leads to disassembly of the formed clusters. This reassures that the system returns to its initial, equilibrium state. By taking advantage of the cyclic nature of our system, we show that clustering can be induced several times by simple injection of new fuel. The fuel-mediated assembly of colloidal building blocks presented here opens new avenues to the complex landscape of nonequilibrium colloidal structures, guided by biological design principles.@en

Concentration gradients play a critical role in embryogenesis, bacterial locomotion, as well as the motility of active particles. Particles develop concentration profiles around them by dissolution, adsorption, or the reactivity of surface species. These gradients change the surface energy of the particles, driving both their self-propulsion and governing their interactions. Here, we uncover a regime in which solute gradients mediate interactions between slowly dissolving droplets without causing autophoresis. This decoupling allows us to directly measure the steady-state, repulsive force, which scales with interparticle distance as F∼1/r2. Our results show that the dissolution process is diffusion rather than reaction rate limited, and the theoretical model captures the dependence of the interactions on droplet size and solute concentration, using a single fit parameter, l=16±3nm, which corresponds to the length scale of a swollen micelle. Our results shed light on the out-of-equilibrium behavior of particles with surface reactivity.@en