Road networks are essential elements of a community's infrastructure and need regular inspection. Present practice requires traffic interruptions and safety risks for inspectors. The road detection system based on vehicle-mounted lasers is also quite mature, offering advantages such as high-precision defect detection, high automation, and fast detection speed. However, it does have drawbacks such as high equipment procurement and maintenance costs, limited flexibility, and insufficient coverage range. Therefore, this paper proposes a low-cost unmanned aerial vehicle (UAV)-based alternative using imagery for automatic road pavement inspection focusing on pothole detection and classification. A slicing-based method, entitled the Pavement Pothole Detection Algorithm, is applied to the imagery after it is converted into a three-dimensional point cloud. When compared with manually extracted results, the proposed UAV-structure-from-motion (SfM) method and the associated algorithm achieved 0.01 m level accuracy for pothole depth detection and maximum errors of 0.0053 m3 in volume evaluation for cases studies of both a road and a bridge deck.

Imagery from Unmanned Aerial Vehicles can be used to generate three-dimensional (3D) point cloud models. However, final data quality is impacted by the flight altitude, camera angle, overlap rate, and data processing strategies. Typically, both overview images and redundant close-range images are collected, which significantly increases the data collection and processing time. To investigate the relationship between input resources and output quality, a suite of seven metrics is proposed including total points, average point density, uniformity, yield rate, coverage, geometry accuracy, and time efficiency. When applied in the field to a full-scale structure, the UAV altitude and camera angle most strongly affected data density and uniformity. A 66% overlapping was needed for successful 3D reconstruction. Conducting multiple flight paths improved local geometric accuracy better than increasing the overlapping rate. The highest coverage was achieved at 77% due to the formation of semi-irregular gridded gaps between point groups as an artefact of the Structure from Motion process. No single set of flight parameters was optimal for every data collection goal. Hence, understanding flight path parameter impacts is crucial to optimal UAV data collection.