This paper investigates techniques for frequency and voltage partitioning of power network based on the graph-theory. These methods divide the power system into distinguished regions to avoid the spread of disturbances and to minimize the interaction between these regions for frequency and voltage control of power system. In case of required active and reactive power for improving the performance of the power system, control can be performed regionally instead of a centralized controller. In this paper, renewable energy sources are connected to the power network to verify the effect of these sources on the power systems partitioning and performance. The number of regions is found based on the frequency sensitivity for frequency partitioning and bus voltage for voltage partitioning to disturbances being applied to loads in each region. The methodology is applied to the north part of Chile power network. The results show the performance and ability of graph frequency and voltage partitioning algorithm to divide large scale power systems to smaller regions for applying decentralized controllers.

This paper proposes an new approach for modeling and analysis the dynamic effects of virtual inertia on two-area AC/DC interconnected AGC power systems. Inertia emulation is known as key factor for modern power systems. In this paper, the higher level application of derivative control for emulating the inertia is investigated. This method of inertia emulation is developed for two-area AGC system which is connected by two parallel AC/DC transmission systems. Based on proposed technique, the dynamic effects of virtual inertia emulation on frequency and active power control could be evaluated. Simulations results, demonstrate how virtual inertia emulation can effectively improves the performance of the power system. Eigenvalue analyses are also added to support the positive effects of proposed method.

Radar backscatter from forest canopies is related to forest cover, canopy structure and aboveground biomass (AGB). The S-band frequency (3.1-3.3 GHz) lies between the longer L-band (1-2 GHz) and the shorter C-band (5-6 GHz) and has been insufficiently studied for forest applications due to limited data availability. In anticipation of the British built NovaSAR-S satellite mission, this study evaluates the benefits of polarimetric S-band SAR for forest biophysical properties. To understand the scattering mechanisms in forest canopies at S-band the Michigan Microwave Canopy Scattering (MIMICS-I) radiative transfer model was used. S-band backscatter was found to have high sensitivity to the forest canopy characteristics across all polarisations and incidence angles. This sensitivity originates from ground/trunk interaction as the dominant scattering mechanism related to broadleaved species for co-polarised mode and specific incidence angles. The study was carried out in the temperate mixed forest at Savernake Forest and Wytham Woods in southern England, where airborne S-band SAR imagery and field data are available from the recent AirSAR campaign. Field data from the test sites revealed wide ranges of forest parameters, including average canopy height (6-23 m), diameter at breast-height (7-42 cm), basal area (0.2-56 m²/ha), stem density (20-350 trees/ha) and woody biomass density (31-520 t/ha). S-band backscatter-biomass relationships suggest increasing backscatter sensitivity to forest AGB with least error between 90.63 and 99.39 t/ha and coefficient of determination (r²) between 0.42 and 0.47 for the co-polarised channel at 0.25 ha resolution. The conclusion is that S-band SAR data such as from NovaSAR-S is suitable for monitoring forest aboveground biomass less than 100 t/ha at 25 m resolution in low to medium incidence angle range.