E Colineau
Please Note
3 records found
1
The low-temperature heat capacity of (U 1-y,Amy)O 2−x solid solution with y = 0.0811 and 0.2005 and x = 0.01–0.03 was determined from a minimum of 12.52 K up to 297.1 K and from 9.77 K up to 302.3 K, respectively, using hybrid adiabatic relaxation calorimtry. The low temperature heat capacity results of the investigated system revealed the absence of the magnetic transition specific for UO2 in the temperature region of 30 K. Since there are no experimental data available for AmO2 in this temperature region, the results obtained for the intermediate compositions are validated based on the experimental data of UO2 end-member and the low-temperature heat capacity computation of AmO2. In the measured temperature interval, excess heat capacity was observed for the two investigated intermediate compositions, which is concluded to be dominated by self-radiation effects at very low temperature.
Structural and thermodynamic study of dicesium molybdate Cs2Mo2O7
Implications for fast neutron reactors
The structure of α-Cs2Mo2O7 (monoclinic in space group P21/c), which can form during irradiation in fast breeder reactors in the space between nuclear fuel and cladding, has been refined in this work at room temperature from neutron diffraction data. Furthermore, the compounds' thermal expansion and polymorphism have been investigated using high temperature X-ray diffraction combined with high temperature Raman spectroscopy. A phase transition has been observed at Ttr(α→β)=(621.9±0.8) K using Differential Scanning Calorimetry, and the structure of the β-Cs2Mo2O7 phase, orthorhombic in space group Pbcm, has been solved ab initio from the high temperature X-ray diffraction data. Furthermore, the low temperature heat capacity of α-Cs2Mo2O7 has been measured in the temperature range T=(1.9–313.2) K using a Quantum Design PPMS (Physical Property Measurement System) calorimeter. The heat capacity and entropy values at T=298.15 K have been derived as Cp,m o(Cs2Mo2O7,cr,298.15K)=(211.9±2.1)JK−1mol−1 and Sm o(Cs2Mo2O7,cr,298.15K)=(317.4±4.3)JK−1mol−1. When combined with the enthalpy of formation reported in the literature, these data yield standard entropy and Gibbs energy of formation as ΔfSm o(Cs2Mo2O7,cr,298.15K)=−(628.2±4.4)JK−1mol−1 and ΔfGm o(Cs2Mo2O7,cr,298.15K)=−(2115.1±2.5)kJmol−1. Finally, the cesium partial pressure expected in the gap between fuel and cladding following the disproportionation reaction 2Cs2MoO4=Cs2Mo2O7+2Cs(g)+ 1/2 O2(g) has been calculated from the newly determined thermodynamic functions.