Microfluidic cell trapping device based on standard PCB technology

Low-cost technology for the integration of micro- and nanochips into fluidic systems on printed circuit board: Fabrication challenges

Limitations of Gluing as a Replacement of Ultrasonic Welding: Attaching Lithium Battery Contacts to PCBs

Dry Film Resist Microfluidic Channels on Printed Circuit Board and its Application as Fluidic Interconnection for Nanofluidic Chips: Fabrication Challenges

Shapeable Li-Ion Batteries as Substrate: Printed Electronics Reliability

DNA tracking within an nanochannel: device fabrication and experiments

Li-ion shapeable batteries: a flexible platform for system-in-package

Evaluation of encapsulation materials for glued Li ion battery contacts

Nanochannels fabrication, filling and DNA manipulation

Fabrication and experimental verification of a dielectrophoretic separation device

Fabrication of a lab-on-a-chip device for single cell analysis using TMMF S2030

Fabrication of nanochannels with nearly flat walls and embedded titanium nitride electrodes for nano bio sensing

Wireless sensor network project PLEISTER Package label electronics including sensing talkative radio

Fabrication and testing of a TMMF S2030 based microfluidic device for single cell analysis

¿/6 Suspended Patch Antenna

Gluing as an alternative to solder flexible batteries for its use in system-in-a-package: preliminary results

Nanochannels fabrication with nearly-flat walls and embedded electrodes for nano-bio sensing

Comparision of conductive glues and ultrasonic welding to contact formable batteries for its use in system-in-a-package: preliminary results

Lab-on-a-chip device for single cell analysis:trapping polystyrene beads

PDMS-glass bonded microfluidic device for single cell analysis:testing, alignment,bonding and trapping of polystyrene beads