Calcium phosphate ceramics are frequently applied to stimulate regeneration of bone in view of their excellent biological compatibility with bone tissue. Unfortunately, these bioceramics are also highly brittle. To improve their toughness, fibers can be incorporated as the reinforcing component for the calcium phosphate cements. Herein, we functionalize the surface of poly(vinyl alcohol) fibers with thermoresponsive poly(N-isopropylacrylamide) brushes of tunable thickness to improve simultaneously fiber dispersion and fiber-matrix affinity. These brushes shift from hydrophilic to hydrophobic behavior at temperatures above their lower critical solution temperature of 32 °C. This dual thermoresponsive shift favors fiber dispersion throughout the hydrophilic calcium phosphate cements (at 21 °C) and toughens these cements when reaching their hydrophobic state (at 37 °C). The reinforcement efficacy of these surface-modified fibers was almost double at 37 versus 21 °C, which confirms the strong potential of thermoresponsive fibers for reinforcement of calcium phosphate cements.

Micro- and nanomotors and their use for biomedical applications have recently received increased attention. However, most designs use top-down methods to construct inorganic motors, which are labour-intensive and not suitable for biomedical use. Herein, we report a high-throughput design of an asymmetric hydrogel microparticle with autonomous movement by using a microfluidic chip to generate asymmetric, aqueous, two-phase-separating droplets consisting of poly(ethylene glycol) diacrylate (PEGDA) and dextran, with the biocatalyst placed in the PEGDA phase. The motor is propelled by enzyme-mediated decomposition of fuel. The speed of the motors is influenced by the roughness of the PEGDA surface after diffusion of dextran and was tuned by using higher molecular weight dextran. This roughness allows for easier pinning of oxygen bubbles and thus higher speeds of the motors. Pinning of bubbles occurs repeatedly at the same location, thereby resulting in constant circular or linear motion.

Micro- and nanomotors and their use for biomedical applications have recently received increased attention. However, most designs use top-down methods to construct inorganic motors, which are labour-intensive and not suitable for biomedical use. Herein, we report a high-throughput design of an asymmetric hydrogel microparticle with autonomous movement by using a microfluidic chip to generate asymmetric, aqueous, two-phase-separating droplets consisting of poly(ethylene glycol) diacrylate (PEGDA) and dextran, with the biocatalyst placed in the PEGDA phase. The motor is propelled by enzyme-mediated decomposition of fuel. The speed of the motors is influenced by the roughness of the PEGDA surface after diffusion of dextran and was tuned by using higher molecular weight dextran. This roughness allows for easier pinning of oxygen bubbles and thus higher speeds of the motors. Pinning of bubbles occurs repeatedly at the same location, thereby resulting in constant circular or linear motion.