The packing densification of mono-sized equilateral cylindrical particles under mechanical vibration is numerically reproduced using discrete element method (DEM). The influences of vibration frequency, amplitude and container size on the macro property (e.g. packing density) of each packing are studied. Meanwhile, various micro-properties including coordination number (CN), radial distribution function (RDF), local structures, contact types, particle position/orientation distributions, forces/stresses of the vibrated dense packing are characterized and compared with those of the loose initial poured packing. The results show that properly controlling vibration conditions can realize the transition of equilateral cylindrical particles from random loose packing (RLP) to random close packing (RCP). The maximum packing density without wall effects can reach about 0.7166, which agrees with experimental and numerical results in literature. Micro property analyses demonstrate that the average CN increases slightly after vibration. The RDF curves indicate three obvious peaks for both poured and vibrated packings. The distributions of intersection angles imply that the perpendicular arrangements of the cylindrical particles are common in both packing structures. From RLP to RCP, the probability of side-edge, bottom-edge and edge-edge contacts between two particles decreases, while that of side-side, side-bottom and bottom-bottom contacts increases. Both particle position and orientation distributions illustrate that the structure in the center of the vibrated packing is disordered. The distribution of strong forces follows the exponential law, while that of weak forces follows the power law. The static vertical stresses in both packings can be predicted by Janssen model. After vibration, a much denser and more stable structure with a larger saturation stress is obtained due to the reducing inter-particle friction effects.@en

This paper presents a systematic numerical investigation of static stress profile within a confined granular packing using discrete element method. The vertical and horizontal stress profiles are carefully identified within the packing structure, and the effects of container diameter and friction coefficient on the stress distributions are systematically investigated and analyzed. The results show a quantitative agreement between the vertical stress profile gauged at the bottom and the stress profile calculated within the packing structure. I.e. beyond a hydrostatic region, the static vertical stresses saturate exponentially with the packing depth. A positive correlation between the saturation stress and the container size and a negative correlation with the friction coefficient can be observed. Besides, it is also found that the well-known Janssen coefficient (or Janssen constant) is not a constant value; it decreases asymptotically to a constant with the packing depth, which implies a non-constant friction effects existed between the granular assemblies and the boundaries. And the analysis of contact forces within the packing structure also indicates a stabilized condition beyond the hydrostatic region. It is believed that these findings could develop a comprehensive insight on the stress distribution of granular matter.@en

In this paper, the transition from random to ordered packings of mono-sized cylindrical particles under 3D mechanical vibration was simulated by discrete element method (DEM). The effects of particle aspect ratio, size of the particulate system and container wall on the granular crystallization were investigated. And the mechanisms were analyzed through the characterization of the order transition process in terms of packing density, coordination number (CN), orientational ordering parameter (O), nucleation and growth of cluster and granular temperature (θ). The results show that nearly perfect crystallization of mono-sized cylindrical particles can be achieved with specific aspect ratio and proper vibration conditions in a cylindrical container. The orientational ordering parameter demonstrates that the crystallization firstly starts from the container wall and then propagates inward gradually. The lower granular temperature in a cuboid container indicates less vibration energy transferred to the granular assembly compared with that in a cylindrical container, illustrating the critical role of container shape in crystallization. The vibrated crystallization of mono-sized cylindrical particles is analogous to entropy-driven process, which can be gradually achieved by the self-assembly of particles with parallel alignments along the already formed ordered clusters (nuclei)or the container wall. These results can help design complex and ordered granular structures.@en

To identify the dense packing of cylinder–sphere binary mixtures (spheres as filling objects), the densification process of such binary mixtures subjected to three-dimensional (3D) mechanical vibrations was experimentally studied. Various influential factors including vibration parameters (such as vibration time t, vibration amplitude A, frequency ω, vibration acceleration Γ) as well as particle size ratio r (small sphere vs. large cylinder), composition of the binary mixtures XL (volume fraction of cylinders), and container size D (container diameter) on the packing density ρ were systematically investigated. The results show that the optimal vibration parameters for different binary cylinder–sphere mixtures are different. The smaller the size ratio, the less vibration acceleration is needed to form a stable dense packing. For each binary mixture, high packing density can be obtained when the volume fraction of large cylindrical particles is dominant. Meanwhile, increasing the container size can decrease the container wall effect and get higher packing density. The proposed analytical model has been proved to be valid in predicting the packing densification of current cylinder–sphere binary mixtures.@en

Bottom pressure of confined granular assemblies saturates at a certain value even this packing bed is being continuously charged. Corresponding formulation has been established to describe this interesting phenomenon. In this work, the influences of particle size and friction on the bottom stresses of granular matter were numerically investigated by discrete element method (DEM). It is found that the Janssen model can well predict the stress profile only when the size ratio of the container versus the particle is larger than 16. Moreover, a hydrostatic linear relation between apparent mass and filling mass can be obtained when the friction coefficient becomes insignificant (μ ≤ 0.01). To further interpret the Janssen effects, the granular assemblies are characterized and evaluated from the overall interactions with sidewalls, angular distribution function, void size distribution, coordination number, contact networks, contact orientation and distributions of contact forces within the packing structure. It is believed that these results will be helpful to comprehend the granular behaviors and may offer instructive reference to industrial processes in related fields.@en