IC

I. Cringus

View Pure Profile

Authored

20 records found

Increase of the adhesive bond strength of UHMWPE by using gas phase activation methods

Durability tests on Martinsite steel and Stainless steel bonded by FM 8210 (Stage 3)

Dogbone Tests Shell Project X200

X200 Thick Adherend test FM8210, Stage no: 4

Physical surface treatments of ultra high molecular weight polythylene and polypropylene
Conference paper - J.A. Poulis, I. Cringus, TJ Ahmed

Glass transition temperature analysis of epoxy adhesive Cytec FM8210
Report - I. Cringus

An Introduction to The Adhesion Institute-report
Report - I. Cringus

Possible methods to test the adhesion between Thorn-D fibres and substrate for foils and fish nets
Report - I. Cringus

The improvement of the adhesion of polyurethane-elastomer coatings on metallic surfaces
Report - I. Cringus

Grit blasting effect on Titanium
Report - I. Cringus

Selection of the best adhesive and treatment aimed to improve adhesion between ABS and magnet
Report - I. Cringus

The improvement of the adhesion between the adhesive-primer and paint-primer for aircraft fuselage
Report - I. Cringus

An introduction to the Adhesion Institute-presentation
Report - I. Cringus

The determination of glass transition temperature and the moisture absorption of a Cytec FM8210
Report - I. Cringus

PETG panels characteristics and their compatibility with polyester resin
Report - I. Cringus

Future experiments for improving Shellac quality and strenght of adhesion between Shellac and lead
Report - I. Cringus

Plasma treatment of Titanium. Study of the adhesive bond strength
Report - I. Cringus

The influence of different surface treatments on the moisture infiltration inside the STUDS
Report - I. Cringus

Plasma treatment of titanium. A study of the adhesive bond strenght
Report - I. Cringus

PP surface activation by using atmospheric plasma treatment
Report - I. Cringus