The global emission of harmful greenhouse gasses has to be reduced. Commercial shipping contributes to these emissions by using fossil fuel as the only energy source to provide propulsion and power auxiliary systems. In order to reduce fuel consumption, much research is focused on increasing the efficiency of the propulsion system and reducing the required power consumption. In recent years an increasing amount of research focuses on utilizing wind energy as an alternative energy source. This is a renewable source of energy which is plentiful at sea. This thesis focuses on the novel concept of using a Vertical Axis Wind Turbine (VAWT) as a means of ship propulsion and power generation. Existing Wind Assisted Ship Propulsion (WASP) systems can only be utilized in conditions when the ship is in transit and when the apparent wind conditions are favorable. The VAWT concept has the ability to generate power in wind conditions where conventional sailing systems are not functional, including when the ship is in port. This system can also be used as a thrusting device when the wind conditions are favorable for sailing systems. Therefore this system can be used more frequently which is beneficial for the overall power savings. The use of a VAWT for WASP in combined operation as a thruster and a power generator does currently not exist. Therefore the design of the rotor has to be investigated and optimized in order to evaluate effective designs for different conditions and to compare this device to existing sailing concepts. The aerodynamic performance of the VAWT will be evaluated using numeric simulation models. This model will be coupled to an optimization algorithm in order to find the optimal design parameters for different wind conditions and modes of operation. This project will result in a better understanding of the working principles of VAWT used for WASP and the potential energy saving of optimized designs for the operational modes as a generator, thruster and combined-operation. There is a large opportunity for capturing wind energy at sea. This project has the potential to add a new method of ship propulsion to reduce shipping emissions and reducing the cost of ship operation. When one or multiple of these systems can be applied on a large share of the worldwide shipping fleet, this research can contribute to the reduction of commercial shipping emissions. ... Read more

In recent years the awareness and the effort to reduce air pollution and global warming have increased. Many new ideas are being developed to reduce harmful emissions. Despite this, the shipping industry is still a large contributor to air pollution worldwide. To reduce the environmental impact of shipping, the use of
sustainable energy sources such as wind energy on-board ships is being explored. Wind energy is widely available at sea, the challenge is to harness this energy. The relatively unknown wind propulsion device called the Turbosail is a vertical wing shaped device which uses wind energy to provide thrust. This propulsion technology was invented in the 1980’s by the Frenchman Jacques-Yves Cousteau. This report describes the investigation into the similar wind propulsion device called the VentiFoil. Two retractable VentiFoils are fitted inside a 40 foot container, this ship propulsion device is called the eConowind unit. Multiple eConowind units can be installed on the hatch covers of general cargo vessels. If successful, this wind propulsion device can be applied on many different ships. The VentiFoil concept will be investigated and improved using Computational Fluid Dynamics (CFD) research tools. These tools are used to simulate the flow around different VentiFoil geometries. The result of this project will be a better understanding of the working principles of the VentiFoil, sensitivity information for the variation of different characteristic design parameters and an evaluation of the generated forces and performance of VentiFoil propulsion. ... Read more