DR
D.R. Rieder
info
Please Note
<p>This page displays the records of the person named above and is not linked to a unique person identifier. This record may need to be merged to a profile.</p>
1 records found
1
Fluidization behavior of stirred gas–solid fluidized beds
A combined X-ray and CFD–DEM–IBM study
Journal article
(2024)
-
P.C. van der Sande, M.J.A. de Munck, K. Wu, D.R. Rieder, D.E.A. van den Eertwegh, E.C. Wagner, G.M.H. Meesters, E.A.J.F. Peters, J.A.M. Kuipers, J.R. van Ommen
Stirred gas–solid fluidized bed reactors are commercially employed in polyolefin manufacturing, but the complex gas–solid contacting dynamics pose challenges in design, scale-up, and operation. In this study, the influence of agitation on the fluidization performance of Geldart B particles was investigated experimentally by X-ray imaging and pressure drop measurements and numerically by Computational Fluid Dynamics (CFD) - Discrete Element Method (DEM) - Immersed Boundary Method (IBM). The experimentally obtained minimum fluidization curve and time-averaged pressure drop show good qualitative agreement with the simulation results. Visual observations underscore that an increase in the angular velocity of the agitator results in reduced bubble size and improved bed homogeneity, as further evidenced by reduced pressure fluctuations. Furthermore, the simulations reveal that while the impeller enhances solids agitation, a proper design study is imperative, considering that static immersed bodies, such as the stirrer shaft, can adversely impact solids motion.
...
Stirred gas–solid fluidized bed reactors are commercially employed in polyolefin manufacturing, but the complex gas–solid contacting dynamics pose challenges in design, scale-up, and operation. In this study, the influence of agitation on the fluidization performance of Geldart B particles was investigated experimentally by X-ray imaging and pressure drop measurements and numerically by Computational Fluid Dynamics (CFD) - Discrete Element Method (DEM) - Immersed Boundary Method (IBM). The experimentally obtained minimum fluidization curve and time-averaged pressure drop show good qualitative agreement with the simulation results. Visual observations underscore that an increase in the angular velocity of the agitator results in reduced bubble size and improved bed homogeneity, as further evidenced by reduced pressure fluctuations. Furthermore, the simulations reveal that while the impeller enhances solids agitation, a proper design study is imperative, considering that static immersed bodies, such as the stirrer shaft, can adversely impact solids motion.