Increase in global energy demand has brought to a massive rise in greenhouse gases emissions. In particular, the continuously increasing atmospheric concentration of carbon dioxide is a major concern among the scientific community. This paved the way for an intense research of CO2 emissions mitigating technologies. Those ones including carbon capture, storage and utilisation are seen as part of the solution for this global problem. In this framework, Zero Emission Fuels (ZEF), a startup company located in Delft (The Netherlands) set the ambitious goal of developing a micro process plant producing methanol from ambient air and sunlight only. Part of the process involves direct capture of carbon dioxide from the atmosphere (direct air capture) with the use of a pure tetraethylenepentamine (TEPA) absorbent. ZEF sets itself aside from the rest of the industry developing an absorber which collects CO2 with no support structure by continuously flowing TEPA inside open channels. Previous research shows how this approach brings limitations connected to slowly diffusing CO2 molecules in the absorbent liquid film in proximity of the gas-liquid interface. In this framework, circulation of TEPA particles from the gas-liquid interface into the bulk of the flowing absorbent is seen as a viable solution to improve the process. This thesis focuses on investigating this hypothesis by inducing mixing on the liquid side. That is done by building two experimental setups investigating both passive and active mixing. Experimental results show that active mixing can be used to improve the rate of CO2 absorption, while passive mixing does not bring significant advantages. Results from the passive mixing experiments are further investigated by modelling the fluid dynamics of the process through a Direct Numerical Simulation of the particular Stokes’ flow in the engineered absorption channel. The process is characterised with the definition of a theoretical framework describing mass transfer in the liquid side. Following an analogy with ice formation on top of a frozen lake, this theory, also known as the ”Ice-Sheet” theory, shines some light on the way this diffusion limitations are happening at a molecular level. In particular, a highly viscous, heavily loaded layer of sorbent on the gas-liquid interface is believed to be the cause for observed CO2 diffusion limitations. This theory is backed-up by defining its mathematical equivalent in the form of a mass transfer model. Comparing the results of the model with experimental results, a very good agreement is observed. That is believed to add credibility to the proposed theory. Moreover, that is also found to be in line with the latest knowledge available in literature about CO2 absorption in TEPA films. Finally, the experimental results and the developed models are used to engineer a new iteration of ZEF’s absorber on a cost reduction basis.