Attenuated Total Reflection Fourier Transform Infrared spectroscopy has become a popular spectroscopic technique in bituminous binder analysis. However, comparable results are not obtainable yet due to differences in devices, measurement routines, sample preparation procedures, and spectral evaluation. Thus, the Task Group 1 of the RILEM TC 295-FBB: “Fingerprinting bituminous binders using physicochemical analysis” focuses on bringing this method towards pre-standardization. This study evaluates the reproducibility and consistency from round robin test, where 21 participating laboratories performed six different preparation techniques on three different binders in an unaged, short-term, and long-term aged state. A total of 6461 spectra were recorded and evaluated for their mean, standard deviation and coefficient of variation (CV) in the spectral region between 1800 and 600 cm⁻¹. The results show that the solid sample preparation methods provide excellent reproducibility, with a coefficient of variation below 2%. Only the solvent method showed a higher coefficient of variation at 7.18%. Outliers with a high CV were detected and categorized into two groups: one where only one of the four samples differed and the other where all 16 spectra showed slight scattering in the overall absorption. The consistency of the method is significantly influenced by the accuracy of sample preparation, which is crucial for minimizing differences in slope, baseline, and noise in the spectra. These findings show the excellent reproducibility of these sample preparation methods and will be further examined to establish universal indices for evaluating effects such as ageing, bringing the method closer towards standardization.

The asphalt industry is constantly working to enhance the performances of asphalt materials, introducing innovative and more sustainable solutions. In this context, the incorporation of materials, such as additives, polymers, is more and more used to improve the properties of neat bitumen. This leads to even more complex bituminous binders, raising the question, are the current specifications and test methods appropriate for complex materials? To deal with this, the RILEM Technical Committee 272-PIM ‘Phase and Interphase behaviour of innovative bi-tuminous Materials’ with its Task Group TG1 is looking at the efficiency of vari-ous test methods for complex binders with an extensive inter-laboratory program with 17 laboratories. It includes seven different binders, two neat bitumen, two polymer modified bitumen and three binders with liquid additives, emphasising on compositional and physical changes at different conditions. The focus is low temperature; while a complementary experimental program encompasses as well as testing at intermediate and high temperatures. The outcomes of the work will provide indications on how robust the current binder characterisation techniques are and establish technical recommendations for future test methods specially de-signed for complex binders. Some first results are presented hereby.

Waste tire rubber has been incorporated into asphalt modification for decades due to its various benefits. There are two main mechanisms during bitumen–rubber interaction: rubber swelling and chemical degradation. This study surveys these two processes from the viewpoint of polymer science. The kinetics of rubber dissolution and thermodynamics of rubber swelling are discussed to provide a fundamental understanding of the interaction process and to demonstrate how optimisation of material selection and processing procedures can lead to the desired binder properties. Factors including the interaction conditions and raw material characteristics are analysed based on the previous theories and compared with experimental results.

Advances related to the use of solubility parameters and free energy theory for the phase behaviour study of polymer-modified bitumen (PMB) are reviewed in this paper. The origin and effects of PMB phase behaviour are criticised with a focus on PMB storage stability, morphology and swelling ratio. An overview of the solubility approach for studying PMB is given regarding the historical and future developments. Free energy expressions for PMB systems are analysed, including the free energy of mixing, elastic free energy and gradient energy. The kinetic aspects are discussed with respect to the diffusion and flow processes. It is indicated that the solubility bodies in the three-dimensional Hansen space and their degree of intersection can be useful for analysing the PMB thermodynamic equilibrium and thus storage stability. But they give no indication by themselves on the PMB morphology. With solubility parameters linked to the PMB free energy, however, an integrated thermodynamic approach can assist in understanding both PMB storage stability and morphology comprehensively. Due to the chemical complexity of bitumen and certain modifiers, the solubility body centres and radiuses should be both considered for a proper expression of the polymer-bitumen interaction in PMB. A hypothetical dilution process can simplify this process, but with limitations. The introduction of elastic free energy may lead to a new and more realistic expression of free energy for PMB system. With this overview, it is expected that a preliminary foundation is established towards a comprehensive and realistic thermodynamic framework for interpreting and predicting PMB phase behaviour.