This study pioneers the use of CuInGaSe2, a quaternary alloy, in Schottky barrier diodes, beyond its traditional application in solar cells, highlighting its potential in sustainable energy technologies such as supercapacitors. We delve into its unique electrical and dielectric characteristics by introducing CuInGaSe2 into the Schottky barrier diode device, synthesized via an innovative liquid phase epitaxy on silicon substrates. Our investigation into the structural, electrical, and dielectric properties reveals the alloy's exceptional capacitance behavior, which transitions from positive to negative with varying frequency. It takes negative values at a frequency of 12 900 Hz and a temperature of 300 K. In comparison, at a frequency of 1216 Hz, all curves take negative and positive values, demonstrating significant promise for enhancing the efficiency and sustainability of energy storage solutions. These findings contribute to the advancement of supercapacitor production and underscore the broader applicability of CuInGaSe2 in promoting sustainable energy technologies.

The current work presents the possibility of tuning the dielectric parameters by changing the temperature, voltage, and frequency. The unusual behavior of some parameters was attributed to the lattice mismatch constant between gallium arsenide (GaAs) and silicon (Si) and the crystal defects between them. In this article, a thin GaAs film has been grown on Si substrates by liquid phase epitaxial (LPE) as n-GaAs/p-Si heterostructure. Despite the lattice mismatch between GaAs and Si, our interest in this article was focused on investigating the electrical and dielectric properties by I-V and C-V measurements. This was distinguished in the behavior of the dielectric properties such as the imaginary part of modules M″, the real and imaginary part of electrical conductivity σ^′ac and σ^″ac, respectively, which has not been seen before at high frequencies.