This paper presents an overview of a sub-orbital flight demonstration with a 183 GHz and 540–600 GHz limb-sounding instrument aboard a stratospheric ballooncraft. The 183 GHz band provides soundings of stratospheric H 2 O and is implemented with a hybrid CMOS-InP receiver architecture which provides excellent sensitivity while remaining compact (162 g) and offering an extremely low DC power consumption (0.62 W). The 540–600 GHz channel sounds stratospheric O 3 and uses a combination of a CMOS local oscillator, GaAs Schottky mixer and micro-electro-mechanical-system (MEMS) RF switch for calibration, again offering competitive form factor (1.4 Kg) and low DC power consumption (6.6 W) compared to prior instruments. The instrument was flown on the NASA Reck-Tang Limb-sounding Experiment (ReckTangLE) ballooncraft and performed atmospheric soundings across New Mexico and Northwestern Texas on Oct. 17 2019.

This paper presents a Ku -band (14-16 GHz) CMOS frequency-modulated continuous-wave (FMCW) radar transceiver developed to measure dry-snow depth for water management purposes and to aid in retrieval of snow water equivalent. An on-chip direct digital frequency synthesizer and digital-to-analog converter digitally generates a chirping waveform which then drives a ring oscillator-based Ku -Band phase-locked loop to provide the final Ku -band FMCW signal. Employing a ring oscillator as opposed to a tuned inductor-based oscillator (LC-VCO) allows the radar to achieve wide chirp bandwidth resulting in a higher axial resolution (7.5 cm), which is needed to accurately quantify the snowpack profile. The demonstrated radar chip is fabricated in a 65-nm CMOS process. The chip consumes 252.4 mW of power under 1.1-V supply, making its payload requirements suitable for observations from a small unmanned aerial vehicle.