High-Content SBS Polymer Modified Asphalt Mixtures (HCPMA) combined with fibers have gained popularity in porous pavement construction due to their superior performance. Although the aging behavior of HCPMA has been extensively studied, the impact of fibers on performance and aging susceptibility remains unclear. This research investigates the influence of two representative fibers (lignin and polyester) on the raveling, cracking, fatigue, and rutting resistance of HCPMA before and after aging using Cantabro loss tests, SCB strength tests, SCB fatigue tests, and Hamburg Wheel-Tracking tests. The results indicate that in the original state, polyester fiber slightly enhances HCPMA performance, while lignin fiber shows limited or even adverse effects on cracking, raveling, fatigue, and rutting resistance. However, both fibers exhibit a more pronounced enhancement effect after short- and long-term aging. FTIR analysis reveals that fiber addition does not significantly impact bitumen oxidation and polymer degradation. The excellent properties of High-Content SBS Polymer Modified Bitumen (HCPMB) in the original state create a "masking" effect that conceals the enhancement effect of fibers, which becomes more evident after long-term aging. Consequently, it is recommended that the performance evaluation and design of open-graded asphalt mixtures containing HCPMB be based on post-aging performance. @en

The film thickness of asphalt mixtures is critical for determining their performance and aging durability. However, understanding of the appropriate film thickness and its influence on performance and aging behavior for high-content polymer-modified asphalt (HCPMA) mixtures is still limited. This research aims to examine the relationship between film thickness, performance, and aging behavior of HCPMA mixtures in order to establish an optimal film thickness that ensures satisfactory performance and aging durability. HCPMA specimens with film thicknesses ranging from 6.9 μm to 17 μm were prepared using a 7.5% SBS-content-modified bitumen. Various tests, including Cantabro, SCB, SCB fatigue, and Hamburg wheel-tracking tests, were conducted to evaluate raveling, cracking, fatigue, and rutting resistance before and after aging. The key findings indicate that insufficient film thickness negatively affects aggregate bonding and performance, while excessive thickness reduces mixture stiffness and resistance to cracking and fatigue. A parabolic relationship between the aging index and film thickness was observed, suggesting that increasing film thickness improves aging durability up to a point, beyond which excessive thickness adversely impacts aging durability. The optimal film thickness for HCPMA mixtures, considering performance before and after aging and aging durability, falls within the 12.9 to 14.9 µm range. This range ensures the best balance between performance and aging durability, offering valuable insights for the pavement industry in designing and utilizing HCPMA mixtures.@en

Lignin, as a major waste from biofuel and paper industries, could be utilized as a modifier to enhance the relevant performance of bitumen. However, the effects of lignin on the thermodynamics properties and molecular structure of bitumen are rarely studied. Meanwhile, the potential modification mechanism of lignin modified bitumen is still unclear. Molecular dynamics (MD) simulation and laboratory experimental methods are combined to explore the influence of lignin on the thermodynamics characteristics, rheological properties as well as the molecular structure of bitumen. The lignin modified bitumen with different dosages of lignin (10, 20 and 30 wt%) were prepared. DSR results from a macroscale view reveal that lignin could significantly improve the modulus, elastic recovery and rutting resistance of bitumen, but it adversely affects the fatigue performance. Meanwhile, the MD simulation results from a microscale perspective show that lignin could increase the density, cohesive energy density, shear viscosity, modulus and adhesive strength of bitumen. However, the free volume, diffusion coefficient and self-healing ability of lignin modified bitumen are weakened with the increase of lignin dosage. The MD simulations results are consistent with the experimental data. Furthermore, the correlations between the microscale and macroscale properties of lignin modified bitumen indicate that the physical and rheological properties of bitumen both depend on the molecular structure dramatically. The findings of this research can provide insights for an in-depth understanding of the effect of lignin on bitumen.@en

It is challenging to rational design persistent luminescence and storage phosphors with high storage capacity of electrons and holes after X-ray charging. Such phosphors have potential applications in anti-counterfeiting and X-ray imaging. Here we have combined vacuum referred binding energy diagram (VRBE) construction, photoluminescence spectroscopy, and thermoluminescence to study the trapping processes of charge carriers in NaYGeO4. In NaYGeO4:0.004Bi3+ and NaYGeO4:0.004Bi3+,0.005Ln3+ (Ln = Tb or Pr), Bi3+ appears to act as a shallow electron trap, while Bi3+ and Ln3+ act as deep hole trapping and recombination centres. We will show how to experimentally determine the VRBE in the Bi2+ 2P1/2 ground state in NaYGeO4 and NaLuGeO4 by thermoluminescence study. The electron trap depth produced by Bi3+ codopant in NaLu1-xYxGeO4:0.003Bi3+,0.008 Tb3+ can be adjusted, by increasing x, resulting in conduction band engineering. By combining Bi3+ as an electron trap and Bi3+ and Tb3+ as the hole traps, excellent X-ray charged afterglow phosphors were developed. The integrated TL intensity of the optimized NaYGeO4:0.004Bi3+ and NaYGeO4:0.003Bi3+,0.008Tb3+ after exposure to X-rays is about 4.5 and 1.1 times higher than that of the state-of-the-art BaFBr(I):Eu2+ storage phosphor. Intense initial Tb3+ 4f → 4f afterglow appears in NaYGeO4:0.003Bi3+,0.008Tb3+ and more than 40 h afterglow is measurable in NaYGeO4:0.004Bi3+ and NaYGeO4:0.003Bi3+, 0.008 Tb3+ after X-ray charging. We will show proof-of-concept anti-counterfeiting and X-ray imaging applications by using the developed afterglow phosphors and CsPbI3 quantum dots. This work not only provides experimental evidence on the VRBE in the Bi2+ 2P1/2 ground state in NaYGeO4, but also shows how to design and develop good afterglow phosphors for anti-counterfeiting and X-ray imaging by deeply studying and controlling the trapping processes of charge carriers in bismuth and/or lanthanides doped inorganic compounds.@en

Porous asphalt pavement is widely used due to its adequate water permeability, noise reduction and skid resistance. The study aims at exploring the potential of using the crumb rubber/styrene–butadienestyrene (CR/SBS) modified bitumen as high-viscosity binder for porous asphalt mixture, and investigating the effect of swelling and degradation degree of crumb rubber as well as SBS dosage on the performance of porous asphalt binder and mixture. The conventional, rheological and engineering properties of CR/SBS modified high-viscosity porous asphalt binders and mixtures were characterized. The results revealed that the CR swelling-degradation degree significantly affected the physical and viscoelastic properties of CR/SBS modified high-viscosity binders. With the swelling time prolonged, the viscosity of rubber bitumen enhanced gradually until reaching the equilibrium state, which kept falling during the degradation process dramatically. The full-swelling binders exhibited the highest complex modulus, zero-shear viscosity, rutting resistance, which deteriorated as the degradation degree increasing. However, the degradation of crumb rubber would be beneficial to improve the workability, thermal cracking resistance and deformation recovery ability of high-viscosity binder. Meanwhile, the incorporation of SBS copolymer could further strengthen both high-and-low temperatures viscoelastic performance of high-viscosity bitumen. In addition, the performance of porous asphalt with CR/SBS modified high-viscosity bitumen could meet the requirements of Marshall stability, air void content, Cantabro loss, run-off loss, anti-rutting, moisture damage resistance and permeability performance. Although the full-swelling asphalt mixture presented the best rutting resistance, it showed the poor adhesive and moisture damage resistance when compared with partial and full-degradation asphalt mixtures.@en

It is well known that crumb rubber (CR) and styrene–butadienestyrene (SBS) composite modified asphalt has better rheological and engineering performance. However, it always presents very poor compatibility and storage stability. Meanwhile, Trans-polyoctenamer (TOR) can effectively improve the compatibility and thermal stability of rubber asphalt. Thus, this study aims to investigate the effectiveness of TOR on rheological properties, microstructure and thermal stability of CR/SBS modified asphalt. The results show that TOR has a significant influence on strengthening anti-rutting and temperature sensitivity of CR/SBS modified asphalt. However, TOR has a slightly negative influence on the anti-cracking ability for CR/SBS modified asphalt, which still maintains the critical low temperature requirement. Furthermore, TOR could be able to promote the conformation of cross-linked structure between polymer and asphalt, resulting in a significant enhancement in rheological properties and thermal stability of CR/SBS modified asphalt. Lastly, the effects of TOR on viscoelastic performance for modified asphalt markedly depend on the component of neat asphalt, and high asphaltene content is beneficial for improving the rheological behavior effects of TOR.@en

This study aims to comprehensively investigate the rejuvenation efficiency of various self-developed compound rejuvenators on the physical, mechanical, and aging properties of aged bitumen, asphalt mortar, and mixture. The results revealed that the restoration capacity of vacuum distilled-oil rejuvenators on high-and-low temperature performance-grade of aged bitumen is more significant. In contrast, an aromatic-oil based rejuvenator is good at enhancing low-temperature grade and aging resistance. Moreover, the temperature and time of the curing conditions for mixing recycling of asphalt mixture were optimized as 150 °C and 120 min. Furthermore, the sufficient anti-rutting, structural stability, and moisture resistance of recycled asphalt mixture affirmed the rejuvenation efficiency of compound rejuvenators. @en