A biokinetic model based on BioWin's Activated Sludge Digestion Model (ASDM) coupled with a nitrous oxide (N₂O) model was setup and calibrated for a full-scale wastewater treatment plant (WWTP) Amsterdam West, in the Netherlands. The model was calibrated using one year of continuous data to predict the seasonal variations of N₂O emissions in the gaseous phase. This, according to our best knowledge, is the most complete full-scale data set used to date for this purpose. The results obtained suggest that the currently available biokinetic model predicted the winter, summer, and autumn N₂O emissions well but failed to satisfactorily simulate the spring peak. During the calibration process, it was found that the nitrifier denitrification pathway could explain the observed emissions during all seasons while a combination of the nitrifier denitrification and incomplete heterotrophic denitrification pathways seemed to be dominant during the emissions peak observed during the spring season. Specifically, kinetic parameters related to free nitrous acid (FNA) displayed significant sensitivity leading to increased N₂O production. The obtained values of two kinetic parameters, i.e., the FNA half-saturation during ammonia oxidising bacteria (AOB) denitrification and the FNA inhibition concentration related to heterotrophic denitrification, suggested a strong influence of the FNA bulk concentration on the N₂O emissions and the observed seasonal variations. Based on the suboptimal performance and limitations of the biokinetic model, further research is needed to better understand the biochemical processes behind the seasonal peak and the influence of FNA.

Nitrous oxide (N₂O) emissions from wastewater treatment plants (WWTPs) exhibit significant seasonal variability, making accurate predictions with conventional biokinetic models difficult due to complex and poorly understood biochemical processes. This study addresses these challenges by exploring data-driven alternatives, using long short-term memory (LSTM) based encoder-decoder models as basis. The models were developed for future integration into a model predictive control framework, aiming to reduce N₂O emissions by forecasting these over varying prediction horizons. The models were trained on 12 months and tested on 3 months of data from a full-scale WWTP in Amsterdam West, the Netherlands. The dataset encompasses seasonal peaks in N₂O emissions typical for winter and spring months. The best performing model, featuring a 256–256 LSTM architecture, achieved the highest accuracy with test R² values up to 0.98 across prediction horizons spanning 0.5 to 6.0 h ahead. Feature importance analysis identified past N₂O emissions, influent flowrate, NH₄⁺, NO_x, and dissolved oxygen (DO) in the aerobic tank as most significant inputs. The observed decreasing influence of historical N₂O emissions over extended prediction horizons highlights the importance and significance of process variables for the model's performance. The model's ability to accurately forecast short-term N₂O emissions and capture immediate trends highlights its potential for operational use in controlling emissions in WWTPs. Further research incorporating diverse datasets and biochemical process inputs related to microbial activities in the N₂O production pathways could improve the model's accuracy for longer forecasting horizons. These findings advocate for hybridising deep learning models with biokinetic and mechanistic insights to enhance prediction accuracy and interpretability.