The Dinggye region, in the central part of the Himalayan orogenic belt, includes the southern part of the Xainza-Dinggye rift and the Mabja Gneiss Dome with leucogranite cores. Previous studies of gneiss domes in this region report the existence of channel flow processes or tectonic exhumation, in addition to partial melting of orogenic mid-crust. However, the relationship between the crustal migration of materials and the north-south-trending normal rifts remains largely unexplored. In this work, we generate a new 3-D electrical resistivity model from an array of magnetotelluric data in the Dinggye region and examine it in addition to other electrical resistivity models to the north and east from previous works. By comparing the geophysical models with available geological and geochemical evidence, we find a clear relationship between the electrical resistivity structure, the presence of gneiss domes, north-south-trending normal rifting, and deep plunging subduction which is related to the source of Helium isotopes (crustal or mantle origin). Overall, the results suggest that the southern migration of lithospheric materials likely contributed to the evolution of the rifts in the Tethys-Himalaya terrane, which also may have been influenced by uplifting and cooling of gneiss domes. The models are consistent with tearing of the Indian lithosphere beneath the Xainza-Dinggye rift and other adjacent rifts. Additionally, the difference in the electrical structure related to the Indian crust along the east-west direction likely results from the exhumation of the continental slab, metamorphism in the Tethys-Himalaya terrane, and southern extrusion of materials in the Lhasa terrane.@en

Both low resistivity zones and low velocity zones are distributed in the middle-lower crust of the western Lhasa terrane, Tibetan Plateau, China. Some estimates from electrical resistivity data suggest large volume fractions of silicate melts that are difficult to reconcile with seismic velocity data that prefer lower volumes. A second conductive phase, such as saline fluids, that drastically reduces the conductivity but does not significantly affect the seismic velocity because of its low volume may be able to explain these differences. In this study, a 3-D model of the electrical resistivity structure is generated on a profile along longitude 85°E from a latitude of 29°N to 32.5°N. Based on experimental measurement of melts and alkali-rich fluids (e.g., H 2O-NaCl), we estimate the volume fraction of each phase that is required to explain the conductive anomalies observed in the geophysical model. The model reveals that the maximum bulk conductivity of the mid-lower crust in the south (1.52 S/m) is much higher than the conductivity of the mid-lower crust in the north (0.18 S/m) when taking 31°N as a rough boundary, near Coqen region. We hypothesize that the conductive zones in the south of the Coqen region may result from a silicate melt and alkali-rich fluid (multicomponent) system. In contrast, partial melting alone can explain the conductive zones in the north. The hypothesis can reconcile the predictions from electrical resistivity data and seismic data, and it corresponds well with zircon Hf isotope data. For example, a combination such as the presence of <1% NaCl-bearing aqueous fluids in addition to 5-10% partial melt can reconcile electrical conductivity data and seismic data. We propose that the contributions from partial melt or saline fluids are controlled by the distinct tectonic dynamics in each region. Furthermore, the model compatible with the idea that the Indian lower crust subducted northwards beneath the Lhasa terrane and may not extend far beyond the Indus-Yarlung Zangbo suture (approximately 30-31°N). The widespread distribution and interconnection of crustal conductors at different depths is consistent with the lateral migration of materials. However, both geophysical data sets agree that some anomalies are discontinuous along the profile. Furthermore, the low-angle subducted Indian Plate with no obvious tearing feature and a low volume of melts may have contributed to the absence of long, continuous, N-S-trending normal faults in this region. @en

Both low resistivity zones and low velocity zones are distributed in the middle-lower crust of the western Lhasa terrane, Tibetan Plateau, China. Some estimates from electrical resistivity data suggest large volume fractions of silicate melts that are difficult to reconcile with seismic velocity data that prefer lower volumes. A second conductive phase, such as saline fluids, that drastically reduces the conductivity but does not significantly affect the seismic velocity because of its low volume may be able to explain these differences. In this study, a 3-D model of the electrical resistivity structure is generated on a profile along longitude 85°E from a latitude of 29°N to 32.5°N. Based on experimental measurement of melts and alkali-rich fluids (e.g., H 2O-NaCl), we estimate the volume fraction of each phase that is required to explain the conductive anomalies observed in the geophysical model. The model reveals that the maximum bulk conductivity of the mid-lower crust in the south (1.52 S/m) is much higher than the conductivity of the mid-lower crust in the north (0.18 S/m) when taking 31°N as a rough boundary, near Coqen region. We hypothesize that the conductive zones in the south of the Coqen region may result from a silicate melt and alkali-rich fluid (multicomponent) system. In contrast, partial melting alone can explain the conductive zones in the north. The hypothesis can reconcile the predictions from electrical resistivity data and seismic data, and it corresponds well with zircon Hf isotope data. For example, a combination such as the presence of <1% NaCl-bearing aqueous fluids in addition to 5-10% partial melt can reconcile electrical conductivity data and seismic data. We propose that the contributions from partial melt or saline fluids are controlled by the distinct tectonic dynamics in each region. Furthermore, the model compatible with the idea that the Indian lower crust subducted northwards beneath the Lhasa terrane and may not extend far beyond the Indus-Yarlung Zangbo suture (approximately 30-31°N). The widespread distribution and interconnection of crustal conductors at different depths is consistent with the lateral migration of materials. However, both geophysical data sets agree that some anomalies are discontinuous along the profile. Furthermore, the low-angle subducted Indian Plate with no obvious tearing feature and a low volume of melts may have contributed to the absence of long, continuous, N-S-trending normal faults in this region. @en

New evidence worldwide has linked the surface locations of mineral deposits and their crustal-scale electrical conductivity footprint. We examine the relationship between the Gangdese Miocene porphyry copper deposits, Tibetan Plateau, and the electrical conductivity signature from a three-dimensional model generated from 311 magnetotelluric measurements. The distribution of electrical resistivity throughout the crust and the conductance within the mid-lower crust (depth range of 25–70 km) is analyzed. The results clearly show that the large and ultra-large Miocene porphyry copper deposits coincide spatially with conductive zones and areas of very-high conductance (>10,000S) in the mid-lower crust. Computations are undertaken to determine the influence of water-bearing silicate melts and alkali-bearing (Na+ and K+) fluids on conductivity. Based on this, the bulk conductivity is interpretated to be caused by a system of alkali-rich volatile-rich partial melt. The alkali-rich volatile-rich magmatic-hydrothermal fluids facilitate the migration and concentration of metal ions originating in deep areas. The volumes necessary are much less than partial melt alone and can thus help to reconcile large conductivity variations with small seismic velocity variations. The electrical structure indicates the magma source area of anatexis in the lower crust, a multi-stage magmatic system with large mid-crustal and small upper-crustal magma reservoirs, and complex pathways related to rift zones. We determine that the conductive zones in the mid-lower crust have an influence on the development of the mineralization and the location of the mineral belt.@en

New evidence worldwide has linked the surface locations of mineral deposits and their crustal-scale electrical conductivity footprint. We examine the relationship between the Gangdese Miocene porphyry copper deposits, Tibetan Plateau, and the electrical conductivity signature from a three-dimensional model generated from 311 magnetotelluric measurements. The distribution of electrical resistivity throughout the crust and the conductance within the mid-lower crust (depth range of 25–70 km) is analyzed. The results clearly show that the large and ultra-large Miocene porphyry copper deposits coincide spatially with conductive zones and areas of very-high conductance (>10,000S) in the mid-lower crust. Computations are undertaken to determine the influence of water-bearing silicate melts and alkali-bearing (Na+ and K+) fluids on conductivity. Based on this, the bulk conductivity is interpretated to be caused by a system of alkali-rich volatile-rich partial melt. The alkali-rich volatile-rich magmatic-hydrothermal fluids facilitate the migration and concentration of metal ions originating in deep areas. The volumes necessary are much less than partial melt alone and can thus help to reconcile large conductivity variations with small seismic velocity variations. The electrical structure indicates the magma source area of anatexis in the lower crust, a multi-stage magmatic system with large mid-crustal and small upper-crustal magma reservoirs, and complex pathways related to rift zones. We determine that the conductive zones in the mid-lower crust have an influence on the development of the mineralization and the location of the mineral belt.@en

New evidence worldwide has linked the surface locations of mineral deposits and their crustal-scale electrical conductivity footprint. We examine the relationship between the Gangdese Miocene porphyry copper deposits, Tibetan Plateau, and the electrical conductivity signature from a three-dimensional model generated from 311 magnetotelluric measurements. The distribution of electrical resistivity throughout the crust and the conductance within the mid-lower crust (depth range of 25–70 km) is analyzed. The results clearly show that the large and ultra-large Miocene porphyry copper deposits coincide spatially with conductive zones and areas of very-high conductance (>10,000S) in the mid-lower crust. Computations are undertaken to determine the influence of water-bearing silicate melts and alkali-bearing (Na+ and K+) fluids on conductivity. Based on this, the bulk conductivity is interpretated to be caused by a system of alkali-rich volatile-rich partial melt. The alkali-rich volatile-rich magmatic-hydrothermal fluids facilitate the migration and concentration of metal ions originating in deep areas. The volumes necessary are much less than partial melt alone and can thus help to reconcile large conductivity variations with small seismic velocity variations. The electrical structure indicates the magma source area of anatexis in the lower crust, a multi-stage magmatic system with large mid-crustal and small upper-crustal magma reservoirs, and complex pathways related to rift zones. We determine that the conductive zones in the mid-lower crust have an influence on the development of the mineralization and the location of the mineral belt.@en

New evidence worldwide has linked the surface locations of mineral deposits and their crustal-scale electrical conductivity footprint. We examine the relationship between the Gangdese Miocene porphyry copper deposits, Tibetan Plateau, and the electrical conductivity signature from a three-dimensional model generated from 311 magnetotelluric measurements. The distribution of electrical resistivity throughout the crust and the conductance within the mid-lower crust (depth range of 25–70 km) is analyzed. The results clearly show that the large and ultra-large Miocene porphyry copper deposits coincide spatially with conductive zones and areas of very-high conductance (>10,000S) in the mid-lower crust. Computations are undertaken to determine the influence of water-bearing silicate melts and alkali-bearing (Na+ and K+) fluids on conductivity. Based on this, the bulk conductivity is interpretated to be caused by a system of alkali-rich volatile-rich partial melt. The alkali-rich volatile-rich magmatic-hydrothermal fluids facilitate the migration and concentration of metal ions originating in deep areas. The volumes necessary are much less than partial melt alone and can thus help to reconcile large conductivity variations with small seismic velocity variations. The electrical structure indicates the magma source area of anatexis in the lower crust, a multi-stage magmatic system with large mid-crustal and small upper-crustal magma reservoirs, and complex pathways related to rift zones. We determine that the conductive zones in the mid-lower crust have an influence on the development of the mineralization and the location of the mineral belt.@en

New evidence worldwide has linked the surface locations of mineral deposits and their crustal-scale electrical conductivity footprint. We examine the relationship between the Gangdese Miocene porphyry copper deposits, Tibetan Plateau, and the electrical conductivity signature from a three-dimensional model generated from 311 magnetotelluric measurements. The distribution of electrical resistivity throughout the crust and the conductance within the mid-lower crust (depth range of 25–70 km) is analyzed. The results clearly show that the large and ultra-large Miocene porphyry copper deposits coincide spatially with conductive zones and areas of very-high conductance (>10,000S) in the mid-lower crust. Computations are undertaken to determine the influence of water-bearing silicate melts and alkali-bearing (Na+ and K+) fluids on conductivity. Based on this, the bulk conductivity is interpretated to be caused by a system of alkali-rich volatile-rich partial melt. The alkali-rich volatile-rich magmatic-hydrothermal fluids facilitate the migration and concentration of metal ions originating in deep areas. The volumes necessary are much less than partial melt alone and can thus help to reconcile large conductivity variations with small seismic velocity variations. The electrical structure indicates the magma source area of anatexis in the lower crust, a multi-stage magmatic system with large mid-crustal and small upper-crustal magma reservoirs, and complex pathways related to rift zones. We determine that the conductive zones in the mid-lower crust have an influence on the development of the mineralization and the location of the mineral belt.@en

New evidence worldwide has linked the surface locations of mineral deposits and their crustal-scale electrical conductivity footprint. We examine the relationship between the Gangdese Miocene porphyry copper deposits, Tibetan Plateau, and the electrical conductivity signature from a three-dimensional model generated from 311 magnetotelluric measurements. The distribution of electrical resistivity throughout the crust and the conductance within the mid-lower crust (depth range of 25–70 km) is analyzed. The results clearly show that the large and ultra-large Miocene porphyry copper deposits coincide spatially with conductive zones and areas of very-high conductance (>10,000S) in the mid-lower crust. Computations are undertaken to determine the influence of water-bearing silicate melts and alkali-bearing (Na+ and K+) fluids on conductivity. Based on this, the bulk conductivity is interpretated to be caused by a system of alkali-rich volatile-rich partial melt. The alkali-rich volatile-rich magmatic-hydrothermal fluids facilitate the migration and concentration of metal ions originating in deep areas. The volumes necessary are much less than partial melt alone and can thus help to reconcile large conductivity variations with small seismic velocity variations. The electrical structure indicates the magma source area of anatexis in the lower crust, a multi-stage magmatic system with large mid-crustal and small upper-crustal magma reservoirs, and complex pathways related to rift zones. We determine that the conductive zones in the mid-lower crust have an influence on the development of the mineralization and the location of the mineral belt.@en