Integrated CO₂ capture and reduction (CCR) using dual-function materials (DFMs) has emerged as a promising strategy for effective utilization of CO₂. A thorough understanding of the reaction mechanisms of CCR using the DFMs is important for enhancing their performances. In this study, Na/Al₂O₃ and Na/Cu/Al₂O₃ were compared to investigate the role of Na-based DFMs, particularly transition-metal-free DFMs, in facilitating CCR to CO. Fixed-bed experiments comprising of CO₂ capture and reduction phase were performed to examine their performances at various temperatures. The two DFMs exhibited similar behaviors during the CO₂ capture phase. In the subsequent reduction phase, the DFMs produced nearly equal amounts of CO, reaching 0.21 mmol/g, at temperatures exceeding 450 °C. By increasing the temperature to 500 °C, the CO production rates reached an identical level of 0.18 mmol/(min·g). Time-resolved in-situ spectroscopy confirmed the formation of carbonate species during the capture phase. Carbonates were further reduced to CO directly or via intermediate formate species in the reduction phase. The formation of formates was predominant on Na/Cu/Al₂O₃ at temperatures below 400 °C. However, at higher temperatures, the direct reductive decomposition of carbonates to form CO became the dominant pathway for both the DFMs. Elucidation of a more detailed mechanism of the direct reductive decomposition pathway is critical, particularly the role of Na sites during the reduction phase.

To mitigate global warming and achieve a sustainable society, innovative technologies for efficient CO2 utilization are required. Integrated CO2 capture and reduction (CCR) using dual-function materials (DFMs) is favorable owing to its potentially low energy consumption, capital investment, and processing costs. Although numerous studies have focused on catalytic science, continuous and steady-state CCR operations have not been sufficiently addressed from an engineering perspective. In this study, a circulating fluidized bed (CFB) system is investigated for continuous CCR to syngas (CO + H2). In the CFB system, transition-metal-free DFM (Na/Al2O3) particles are circulated between two bubbling fluidized-bed reactors. The DFM captures CO2 in one reactor (CO2 capture reactor) and reduces the captured CO2 to CO by the reaction with H2 in the other reactor (H2 reactor). The effluent gas concentrations from both reactors reach steady state and are maintained for over 8 h. For the product gas from the H2 reactor, the CO2 conversion and CO selectivity exceed 80 % and 99 %, respectively. However, the H2 conversion is <20 %, indicating a potential challenge for the CFB system for integrated CCR. Furthermore, this study confirms that the H2/CO ratio for syngas can be controlled by adjusting the experimental conditions (particularly, the H2 flow rate). Consequently, the CFB system can be modified to facilitate the interaction between H2 gas and the DFM particles.