There is a growing demand for nano-satellite missions that require advancements in micro-propulsion capabilities to facilitate a wider range of orbital maneuvers. Among these capabilities, the ability to accurately control thrust would unlock new possibilities for nano-satellite applications, including missions such as space debris removal and orbit transfer.
Delft University of Technology is currently pioneering the development of an innovative green propellant-driven micro-propulsion system based on micro-electro-mechanical (MEMS) technologies for its PocketQube, known as Delfi-PQ, which features a compact form factor of 5x5x5 cm. While the thruster itself is in development, the interfacing and integration with other components are still ongoing.
Given the stringent mass, volume, and power limitations imposed by PocketQube satellite requirements, there is a pressing need for micro-scale components to realize a highly integrated propulsion system.
This thesis focuses on the design of a MEMS-based microvalve for proportional flow control in micro-resistojets. The design is conceptualized as comprising three components working in harmony: a valve seat with inlet and outlet, a flexible membrane, and a piezoelectric actuator. The valve seat with inlet and outlet, as well as the flexible membrane, utilize MEMS manufacturing techniques and are based on a silicon chip. And, a new design for piezoelectric actuators employing the d31 mode for contraction strokes is proposed.
The proposed preliminary design is a normally closed microvalve designed for a flow rate of 5g/hr, with the flexibility to accommodate higher flow rates if needed. It offers proportional flow control, ensuring precise regulation of fluid flow. Additionally, it promises a low power consumption of less than 1W and a low response time. Furthermore, this thesis provides a detailed outline of the MEMS fabrication process flow available at TU Delft’s Else Kooi Laboratory for the device. It also features a comprehensive test plan aimed
at assessing the feasibility of this design in future studies. Additionally, the thesis includes an elaborate risk analysis to help identify and mitigate potential risks during the manufacturing and testing phases.
The design shows promise and could pave the way for future developments of the microvalve within the department.