Geodesists use multiple methods to monitor surface deformation. This gives the opportunity to integrate complementary data for better interpretation of deformation processes. The integration of data has to deal with: (1) spatio-temporal differences in sampling methodologies, meaning that observed objects are not the same and thus observed processes may stem from different sources; and (2) physical differences in the methodologies leading to different kinds of coordinate reference systems with possibly different datums. This makes integration of data challenging.In this thesis, we address one of the fundamental roots to this integration problem, by developing co-located reference points for multiple geodetic monitoring methods. This will ensure that, for multiple geodetic monitoring methods, one common deformation process is observed. This eliminates interpolation between observations. I show the main requirements for an Integrating Geodetic Reference Station (IGRS), present a design for a fully functional IGRS and describe its performance. Furthermore, the protocols for deployment and operational use are given. Benchmarks for InSAR, GNSS, levelling, LiDAR, and gravimetry are present on the IGRS. From field tests, it is found that presented radar reflectors have a 1-sigma measurement precision of <0.5 mm in the Line-of-Sight of the radar. This includes both the structural stability as the influence due to clutter. Furthermore, it is shown that the GNSS antenna has mm precise performance, similar to standard monitoring GNSS set-ups.The developed IGRS can be deployed to create a local datum connection between datasets. Ideally IGRSs, either the design presented in this thesis or similar, are deployed where integration, validation and calibration of data, especially InSAR data, is needed.