Transitioning to a circular built environment can reduce the environmental impacts, resource consumption and waste generation emanating from buildings. However, there are many options to design circular building components, and limited knowledge on which options lead to the best environmental performance. Few guidelines exist and they build on conventional environmental performance assessments that focus on single life cycles, whereas the circular economy (CE) focuses on a sequence of multiple use-and life cycles. In this article, environmental design guidelines for circular building components were developed in five steps. First, examples of circular variants of a building structure were synthesized. Second, the environmental performance of these variants was compared with a business-as-usual variant through Life Cycle Assessments (LCA) and Material Flow Analysis (MFA) respectively. Circular parameters of these variants were tested using a scenario-specific approach. Third, from 24 LCAs and MFAs, a scorecard, rules-of-thumb and nine environmental design guidelines for designing circular building components were developed that provide guidance on which circular pathways and variants lead to the best environmental performance. For components with a long functional–technical lifespan, the following are promoted: resource efficiency, longer use through adaptable design, low-impact biomaterials and facilitating multiple cycles after and of use. Fourth, the design guidelines were evaluated by 49 experts from academia, industry and government in seven expert sessions. Further research is needed to validate the generalizability of the design guidelines. However, this research makes an important step in supporting the development of circular building components and, subsequently, the transition to a circular built environment.

Introduction. The building sector consumes 40% of resources globally, produces 40% of global waste and 33% of greenhouse gas emissions. The transition towards a Circular Economy (CE) in the built environment is vital to achieve the Sustainable Development Goals (SDGs) of climate action and responsible consumption and production. Metrics are needed to support this transition; previous work identified Life Cycle Assessment (LCA) as the best method to analyse the environmental performance of the CE. However, current LCA methods focus on the individual system, considering a single lifecycle. Circular assessment requires a systems-perspective: buildings, components, parts and materials have multiple lifecycles. Thus, questions arise about how benefits and burdens should be allocated between systems. Method. In this study, we compare the potential influence of applying different allocation approaches in LCA method. We calculate the environmental impacts of two 'circular building components': (1) a concrete column designed for direct reuse and (2) a recyclable roof felt. We applied four allocation approaches: (a) the cut-off approach stated in EN 15804/15978, (b) the Circular Footprint Formula (CFF) from the Product Environmental Footprint (PEF), (c) the 50:50 approach, and (d) the linearly degressive (LD) approach. Results. The allocation approaches resulted in notable differences in impact distributions thereby incentivising different CE principles (narrowing, slowing and closing). Due to the long lifespan of building components, concerns regarding uncertainty and 'green-washing' resulting from allocation of impacts between cycles arise. However, the LD approach was, for closed-loop systems (such as the ones assessed here), found to be promising: it is simple to use; it creates incentives for narrowing, slowing and closing loops and to design for these in the future; it deals with the uncertainty, material quality and number of use cycles. Conclusion. The comparison of allocation approaches and first recommendation on an allocation approach provides an important step towards circular life cycle assessment and, subsequently, helps promote the CE concept within the building industry.

Transitioning the built environment to a circular economy (CE) is vital to achieve sustainability goals but requires metrics. Life cycle assessment (LCA) can analyse the environmental performance of CE. However, conventional LCA methods assess individual products and single life cycles whereas circular assessment requires a systems perspective as buildings, components and materials potentially have multiple use and life cycles. How should benefits and burdens be allocated between life cycles? This study compares four different LCA allocation approaches: (a) the EN 15804/15978 cut-off approach, (b) the Circular Footprint Formula (CFF), (c) the 50:50 approach, and (d) the linearly degressive (LD) approach. The environmental impacts of four ‘circular building components’ is calculated: (1) a concrete column and (2) a timber column both designed for direct reuse, (3) a recyclable roof felt and (4) a window with a reusable frame. Notable differences in impact distributions between the allocation approaches were found, thus incentivising different CE principles. The LD approach was found to be promising for open and closed-loop systems within a closed loop supply chain (such as the ones assessed here). A CE LD approach was developed to enhance the LD approach’s applicability, to closer align it with the CE concept, and to create an incentive for CE in the industry.