This paper explores the potential use of conductive alginate capsules encapsulating a bitumen rejuvenator as a new extrinsic self-healing asphalt method. The capsules combine two existing self-healing asphalt technologies: (1) rejuvenator encapsulation and (2) induction heating to create a self-healing system that will provide rapid and effective asphalt pavement repair. The work presents a proof of concept for the encapsulation process, which involves embedding the capsules into the bitumen mortar mixture and the survival rate of the capsules in the asphalt mixture. A drip capsule production process was adopted and scaled up to the production of 20l wet capsules at rate of 0.22 l/min. To prove the effectiveness and its ability to survive asphalt production process, the capsules were prepared and subjected to thermogravimetric analysis (TGA) and uniaxial compression Test (UCT). The test results demonstrated that the capsules had suitable thermal characteristics and mechanical strength to survive the asphalt mixing and compaction process. Scanning electron microscopy (SEM) was employed to investigate physiological properties, such as rejuvenator (oil) and iron particle distribution, within the capsules. The electrical resistance tests proved that the capsules were capable of conducting electrical current. The capsules were also tested for their conductive properties in order to determine whether they are capable of conducting and distributing the heat once subjected to induction heating. The results showed that capsules containing higher amounts of iron (alginate/iron powder in a ratio of 20:80 by weight) can efficiently conduct and distribute heat. To prove its success as an asphalt healing system, conductive alginate capsules encapsulating a bitumen rejuvenator were embedded in a bitumen mortar mix. The samples where then subjected to local damaging and healing events, and the degree of healing was quantified. The research findings indicate that conductive alginate capsules encapsulating a bitumen rejuvenator present a promising new approach for the development of an extrinsic self-healing asphalt pavement systems.

This paper explores the potential methods for evaluating a healing system for asphalt pavements. The healing system under investigation involves compartmented calcium-alginate fibres encapsulating an asphalt binder healing agent (rejuvenator). This system presents a novel method of incorporating rejuvenators into asphalt pavement mixtures. The compartmented fibres are used to distribute the rejuvenator throughout the pavement mixture, thereby overcoming some of the problems associated with alternate asphalt pavement healing methods, i.e., spherical capsules and hollow fibres. The asphalt healing efficiency methods to be evaluated in this paper include: (i) standard test methods for asphalt pavements, such as the Indirect Tensile Strength test and the 4 Point Bending Fatigue test; and (ii) alternative fracture tests such as the SemiCircular Bend test. The study employs fracture theory in order to evaluate the efficiency of the damage repair. The research findings demonstrate that including compartmented calcium-alginate fibres encapsulating a rejuvenator into an asphalt pavement mix does not significantly improve the healing properties of the asphalt pavement. Nevertheless, the findings indicate that, with further enhancement, compartmented calcium alginate fibres may present a promising new approach for the development of self-healing asphalt pavement systems. Additionally, the test results indicate that the 4 point bend fatigue test is the most suitable test for evaluating the performance of self healing asphalt pavements.