The use of simulation techniques is not foreign to information retrieval. In the past, simulation has been employed, for example, for constructing test collections and for model performance prediction and analysis in a broad array of information access scenarios. Nevertheless, a standardized methodology for performance evaluation via simulation has not yet been developed. The goal of this workshop is to create a forum for researchers and practitioners to promote methodology development and more widespread use of simulation for evaluation by: (1) identifying problem settings and application scenarios; (2) sharing tools, techniques, and experiences; (3) characterizing potentials and limitations; and (4) developing a research agenda.@en

The relationship between flow properties and chemical reactions is the key to modeling subsurface reactive transport. This study develops closed-form equations to describe the effects of mineral precipitation and dissolution on multi-phase flow properties (capillary pressure and relative permeabilities) of porous media. The model accounts for the fact that precipitation/dissolution only takes place in the water-filled part of pore space. The capillary tube concept was used to connect pore-scale changes to macroscopic hydraulic properties. Precipitation/dissolution induces changes in the pore radii of water-filled pores and consequently in the pore size distribution. The updated pore size distribution is converted back to a new capillary pressure–water saturation relation from which the new relative permeabilities are calculated. Pore network modeling is conducted on a Berea sandstone to validate the new continuum-scale relations. The pore network modeling results are satisfactorily predicted by the new closed-form equations.@en

The relationship between flow properties and chemical reactions is the key to modeling subsurface reactive transport. This study develops closed-form equations to describe the effects of mineral precipitation and dissolution on multi-phase flow properties (capillary pressure and relative permeabilities) of porous media. The model accounts for the fact that precipitation/dissolution only takes place in the water-filled part of pore space. The capillary tube concept was used to connect pore-scale changes to macroscopic hydraulic properties. Precipitation/dissolution induces changes in the pore radii of water-filled pores and consequently in the pore size distribution. The updated pore size distribution is converted back to a new capillary pressure–water saturation relation from which the new relative permeabilities are calculated. Pore network modeling is conducted on a Berea sandstone to validate the new continuum-scale relations. The pore network modeling results are satisfactorily predicted by the new closed-form equations.@en

Three-dimensional (3-D) printing provides a fast, cost-effective way to produce and replicate complicated designs with minimal flaws and little material waste. Early use of 3-D printing for engineering applications in the petroleum industry has stimulated further adoption by geoscience researchers and educators. Recent progress in geoscience is signified by capabilities that translate digital rock models into 3-D printed rock proxies. With a variety of material and geometric scaling options, 3-D printing of nearidentical rock proxies provides a method to conduct repeatable laboratory experiments without destroying natural rock samples. Rock proxy experiments can potentially validate numerical simulations and complement existing laboratory measurements on changes of rock properties over geologic time scales. A review of published research from academic, government, and industry contributions indicates a growing community of rock proxy experimentalists. Three-dimensional printing techniques are being applied to fundamental research in the areas of multiphase fluid flow and reactive transport, geomechanics, physical properties, geomorphology, and paleontology. Further opportunities for geoscience research are discussed. Applications in education include teaching models of terrains, fossils, and crystals. The integration of digital data sets with 3-D printed geomorphologies supports communication for both societal and technical objectives. Broad benefits that could be realized from centralized 3-D printing facilities are also discussed.@en

Three-dimensional (3-D) printing provides a fast, cost-effective way to produce and replicate complicated designs with minimal flaws and little material waste. Early use of 3-D printing for engineering applications in the petroleum industry has stimulated further adoption by geoscience researchers and educators. Recent progress in geoscience is signified by capabilities that translate digital rock models into 3-D printed rock proxies. With a variety of material and geometric scaling options, 3-D printing of nearidentical rock proxies provides a method to conduct repeatable laboratory experiments without destroying natural rock samples. Rock proxy experiments can potentially validate numerical simulations and complement existing laboratory measurements on changes of rock properties over geologic time scales. A review of published research from academic, government, and industry contributions indicates a growing community of rock proxy experimentalists. Three-dimensional printing techniques are being applied to fundamental research in the areas of multiphase fluid flow and reactive transport, geomechanics, physical properties, geomorphology, and paleontology. Further opportunities for geoscience research are discussed. Applications in education include teaching models of terrains, fossils, and crystals. The integration of digital data sets with 3-D printed geomorphologies supports communication for both societal and technical objectives. Broad benefits that could be realized from centralized 3-D printing facilities are also discussed.@en

Three-dimensional (3-D) printing provides a fast, cost-effective way to produce and replicate complicated designs with minimal flaws and little material waste. Early use of 3-D printing for engineering applications in the petroleum industry has stimulated further adoption by geoscience researchers and educators. Recent progress in geoscience is signified by capabilities that translate digital rock models into 3-D printed rock proxies. With a variety of material and geometric scaling options, 3-D printing of nearidentical rock proxies provides a method to conduct repeatable laboratory experiments without destroying natural rock samples. Rock proxy experiments can potentially validate numerical simulations and complement existing laboratory measurements on changes of rock properties over geologic time scales. A review of published research from academic, government, and industry contributions indicates a growing community of rock proxy experimentalists. Three-dimensional printing techniques are being applied to fundamental research in the areas of multiphase fluid flow and reactive transport, geomechanics, physical properties, geomorphology, and paleontology. Further opportunities for geoscience research are discussed. Applications in education include teaching models of terrains, fossils, and crystals. The integration of digital data sets with 3-D printed geomorphologies supports communication for both societal and technical objectives. Broad benefits that could be realized from centralized 3-D printing facilities are also discussed.@en

Three-dimensional (3-D) printing provides a fast, cost-effective way to produce and replicate complicated designs with minimal flaws and little material waste. Early use of 3-D printing for engineering applications in the petroleum industry has stimulated further adoption by geoscience researchers and educators. Recent progress in geoscience is signified by capabilities that translate digital rock models into 3-D printed rock proxies. With a variety of material and geometric scaling options, 3-D printing of nearidentical rock proxies provides a method to conduct repeatable laboratory experiments without destroying natural rock samples. Rock proxy experiments can potentially validate numerical simulations and complement existing laboratory measurements on changes of rock properties over geologic time scales. A review of published research from academic, government, and industry contributions indicates a growing community of rock proxy experimentalists. Three-dimensional printing techniques are being applied to fundamental research in the areas of multiphase fluid flow and reactive transport, geomechanics, physical properties, geomorphology, and paleontology. Further opportunities for geoscience research are discussed. Applications in education include teaching models of terrains, fossils, and crystals. The integration of digital data sets with 3-D printed geomorphologies supports communication for both societal and technical objectives. Broad benefits that could be realized from centralized 3-D printing facilities are also discussed.@en

Three-dimensional (3-D) printing provides a fast, cost-effective way to produce and replicate complicated designs with minimal flaws and little material waste. Early use of 3-D printing for engineering applications in the petroleum industry has stimulated further adoption by geoscience researchers and educators. Recent progress in geoscience is signified by capabilities that translate digital rock models into 3-D printed rock proxies. With a variety of material and geometric scaling options, 3-D printing of nearidentical rock proxies provides a method to conduct repeatable laboratory experiments without destroying natural rock samples. Rock proxy experiments can potentially validate numerical simulations and complement existing laboratory measurements on changes of rock properties over geologic time scales. A review of published research from academic, government, and industry contributions indicates a growing community of rock proxy experimentalists. Three-dimensional printing techniques are being applied to fundamental research in the areas of multiphase fluid flow and reactive transport, geomechanics, physical properties, geomorphology, and paleontology. Further opportunities for geoscience research are discussed. Applications in education include teaching models of terrains, fossils, and crystals. The integration of digital data sets with 3-D printed geomorphologies supports communication for both societal and technical objectives. Broad benefits that could be realized from centralized 3-D printing facilities are also discussed.@en

Three-dimensional (3-D) printing provides a fast, cost-effective way to produce and replicate complicated designs with minimal flaws and little material waste. Early use of 3-D printing for engineering applications in the petroleum industry has stimulated further adoption by geoscience researchers and educators. Recent progress in geoscience is signified by capabilities that translate digital rock models into 3-D printed rock proxies. With a variety of material and geometric scaling options, 3-D printing of nearidentical rock proxies provides a method to conduct repeatable laboratory experiments without destroying natural rock samples. Rock proxy experiments can potentially validate numerical simulations and complement existing laboratory measurements on changes of rock properties over geologic time scales. A review of published research from academic, government, and industry contributions indicates a growing community of rock proxy experimentalists. Three-dimensional printing techniques are being applied to fundamental research in the areas of multiphase fluid flow and reactive transport, geomechanics, physical properties, geomorphology, and paleontology. Further opportunities for geoscience research are discussed. Applications in education include teaching models of terrains, fossils, and crystals. The integration of digital data sets with 3-D printed geomorphologies supports communication for both societal and technical objectives. Broad benefits that could be realized from centralized 3-D printing facilities are also discussed.@en

Understanding pore-scale flow and transport processes is important for understanding flow and transport within rocks on a larger scale. Flow experiments on small-scale micromodels can be used to experimentally investigate pore-scale flow. Current manufacturing methods of micromodels are costly and time consuming. 3D printing is an alternative method for the production of micromodels. We have been able to visualise small-scale, single-phase flow and transport processes within a 3D printed micromodel using a custom-built visualisation cell. Results have been compared with the same experiments run on a micromodel with the same geometry made from polymethyl methacrylate (PMMA, also known as Perspex). Numerical simulations of the experiments indicate that differences in experimental results between the 3D printed micromodel and the Perspex micromodel may be due to variability in print geometry and surface properties between the samples. 3D printing technology looks promising as a micromodel manufacturing method; however, further work is needed to improve the accuracy and quality of 3D printed models in terms of geometry and surface roughness.@en