GW

G.N. Wells

info

Please Note

13 records found

Journal article (2017) - Alexandra Fumasoli, Helmut Bürgmann, David G. Weissbrodt, George F. Wells, Karin Beck, Joachim Mohn, Eberhard Morgenroth, Kai M. Udert
Ammonia oxidation decreases the pH in wastewaters where alkalinity is limited relative to total ammonia. The activity of ammonia oxidizing bacteria (AOB), however, typically decreases with pH and often ceases completely in slightly acidic wastewaters. Nevertheless, nitrification at low pH has been reported in reactors treating human urine, but it has been unclear which organisms are involved. In this study, we followed the population dynamics of ammonia oxidizing organisms and reactor performance in synthetic fully hydrolyzed urine as the pH decreased over time in response to a decrease in the loading rate. Populations of the β-proteobacterial Nitrosomonas europaea lineage were abundant at the initial pH close to 6, but the growth of a possibly novel Nitrosococcus-related AOB genus decreased the pH to the new level of 2.2, challenging the perception that nitrification is inhibited entirely at low pH values, or governed exclusively by β-proteobacterial AOB or archaea. With the pH shift, nitrite oxidizing bacteria were not further detected, but nitrous acid (HNO2) was still removed through chemical decomposition to nitric oxide (NO) and nitrate. The growth of acid-tolerant γ-proteobacterial AOB should be prevented, by keeping the pH above 5.4, which is a typical pH limit for the N. europaea lineage. Otherwise, the microbial community responsible for high-rate nitrification can be lost, and strong emissions of hazardous volatile nitrogen compounds such as NO are likely. ...
Journal article (2017) - G. F. Wells, Y. Shi, M. Laureni, A. Rosenthal, I. Szivák, D. G. Weissbrodt, A Joss, H. Buergmann, D. R. Johnson, E Morgenroth
Combined partial nitritation-anammox (PN/A) systems are increasingly being employed for sustainable removal of nitrogen from wastewater, but process instabilities present ongoing challenges for practitioners. The goal of this study was to elucidate differences in process stability between PN/A process variations employing two distinct aggregate types: biofilm [in moving bed biofilm reactors (MBBRs)] and suspended growth biomass. Triplicate reactors for each process variation were studied under baseline conditions and in response to a series of transient perturbations. MBBRs displayed elevated NH4+ removal rates relative to those of suspended growth counterparts over six months of unperturbed baseline operation but also exhibited significantly greater variability in performance. Transient perturbations led to strikingly divergent yet reproducible behavior in biofilm versus suspended growth systems. A temperature perturbation prompted a sharp reduction in NH4+ removal rates with no accumulation of NO2- and rapid recovery in MBBRs, compared to a similar reduction in NH4+ removal rates but a high level of accumulation of NO2- in suspended growth reactors. Pulse additions of a nitrification inhibitor (allylthiourea) prompted only moderate declines in performance in suspended growth reactors compared to sharp decreases in NH4+ removal rates in MBBRs. Quantitative fluorescence in situ hybridization demonstrated a significant enrichment of anammox in MBBRs compared to suspended growth reactors, and conversely a proportionally higher AOB abundance in suspended growth reactors. Overall, MBBRs displayed significantly increased susceptibility to transient perturbations employed in this study compared to that of suspended growth counterparts (stability parameter), including significantly longer recovery times (resilience). No significant difference in the maximal impact of perturbations (resistance) was apparent. Taken together, our results suggest that aggregate architecture (biofilm vs suspended growth) in PN/A processes exerts an unexpectedly strong influence on process stability. ...