Many topographic scenes exhibit complex dynamic behavior that is difficult to map, quantify, predict and understand. A terrestrial laser scanner fixed on a permanent position can be used to monitor such scenes in an automated way with centimeter to decimeter quality at ranges of up to several kilometers. Laser scanners are active sensors, and are therefore able to continue operation during night. Their independence from texture conditions ensures that in principle they provide stable range measurements for varying surface conditions. Recent years have seen a strong increase in the employment of such systems for different scientific applications in geosciences, environmental and ecological sciences, including forestry, glaciology, and geomorphology. At the same time, this employment resulted in a new type of 4D topographic data sets (3D point clouds + time) with a significant temporal dimension, as systems are now able to acquire thousands of consecutive epochs in a row. Extracting information from these 4D data sets turns out to be challenging, first, because of insufficient knowledge on error budget and correlations, and, second, because of lack of algorithms, benchmarks, and best-practice workflows. This paper provides an overview of different 4D systems for near-continuous laser scanning, and discusses systematic challenges including instability of the sensor system, meteorological and atmospheric influences, and data alignment, before discussing recently developed methods and scientific software for extracting and parameterizing changes from 4D topographic data sets, in connection to the different applications.

The advancement of permanently measuring laser scanners has opened up a wide range of new applications, but also led to the need for more advanced approaches on error quantification and correction. Time-dependent and systematic error influences may only become visible in data of quasi-permanent measurements. During a scan experiment in February/March 2020 point clouds were acquired every thirty minutes with a Riegl VZ-2000 laser scanner, and various other sensors (inclination sensors, weather station and GNSS sensors) were used to survey the environment of the laser scanner and the study site. Using this measurement configuration, our aim is to identify apparent displacements in multioral scans due to systematic error influences and to investigate data quality for assessment of geomorphic changes in coastal regions. We analyse scan data collected around two storm events around 09/02/2020 (Ciara) and around 22/02/2020 (Yulia) and derive the impact of heavy storms on the point cloud data through comparison with the collected auxiliary data. To investigate the systematic residuals on data acquired by permanent laser scanning, we extracted several stable flat surfaces from the point cloud data. From a plane fitted through the respective surfaces of each scan, we estimated the mean displacement of each plane with the respective root mean square errors. Inclination sensors, internal and external, recorded pitch and roll values during each scan. We derived a mean inclination per scan (in pitch and roll) and the standard deviation from the mean as a measure of the stability of the laser scanner during each scan. Evaluation of the data recorded by a weather station together with knowledge of the movement behaviour, allows to derive possible causes of displacements and/or noise and correction models. The results are compared to independent measurements from GNSS sensors for validation. For wind speeds of 10m/s and higher, movements of the scanner considerably increase the noise level in the point cloud data.