We'll report on two series all-aromatic main-chain reactive oligomers that can be crosslinked in either the nematic phase or in the isotropic phase. This series is unique in that both model systems have an identical backbone geometry, comprised of hydroquinone with or without a phenyl substituent and phenyl substituted terephthalic acid. Crosslinking the oligomers (Mn of 1–9 kg/mol) via maleimide end-groups in the nematic or isotropic phase yields networks with similar crosslink densities (Mc) and similar thermal properties. Crosslinked films exhibit high decomposition temperatures (>395°C) and amorphous thermoset films exhibit Tg's in the 141–190°C range whereas nematic thermoset films give Tg's that range from 143 to 176°C, as measured by DMTA. However, the phase type appears to have a major effect on the stress–strain behavior of the films. All films prepared by crosslinking un-aligned nematic oligomers show poor stress–strain behavior (σ = 20–63 MPa, ε = 0.5%–5.4%), whereas crosslinking the amorphous oligomers results in films with excellent stress–strain properties (σ = 94–97 MPa, ε = 7.1%–13.3%). The superior toughness of the cured amorphous films can be attributed to the larger free volume induced by steric crowding of the phenyl substituents in the polymer repeat unit.@en

We report on the rheology of isotropic and nematic aqueous solutions of a sulfonated all-aromatic polyamide, poly(2,2′-disulfonyl-4,4′-benzidine terephthalamide) (PBDT), that forms high-aspect-ratio rod-like assemblies. For quiescently isotropic solutions, the concentration dependence of the zero-shear viscosity, longest relaxation time, and terminal modulus shows deviations in comparison to the Doi-Edwards theory for hard rods. For quiescently nematic solutions, we characterize the flow behavior through steady-state and transient nonlinear rheological measurements in conjunction with small-angle neutron scattering under shear. The steady-state flow curve is characterized by two anomalous shear thickening responses, one at moderate shear rates and the other immediately prior to flow alignment at high shear rates. We assign the origin of these shear thickening response to director “kayaking” and “out-of-plane steady” states, using predictions from prior high-resolution numerical simulations of sheared nematic rods. Utilizing transient shear flow reversals and step-down experiments, we characterize the oscillatory response of the nematic director through these flow regimes. When the first normal stress difference is plotted versus the shear stress during a transient step-down, the so-called dynamic stress path, the counterclockwise versus clockwise rotation has previously been shown to reveal the relative dominance of viscous versus elastic contributions to the stress tensor, respectively. Our measurements strongly suggest that the anomalous shear thickening behavior in nematic PBDT solutions arises from viscous stresses developed as the ensemble of rods undergoes periodic oscillatory motion under shear, rather than elastic stresses due to broadening of the orientational distribution function.@en

We report on the shear rheology of liquid crystalline solutions composed of charged, rodlike polymers that form supramolecular assemblies dispersed in water. Under steady shear, we observe shear thickening behavior, followed by a hesitation in the viscosity accompanied by an extremely narrow range of negative first normal stress difference. The Peclet number (Pe, shear rate normalized by rod rotational diffusivity) for the onset of shear thickening is in agreement with previous, high-resolution numerical simulations of the Doi-Edwards-Hess kinetic theory. We interrogate these dynamic responses through shear step-down experiments, revealing a complex evolution of transient responses. Detailed analysis of the stress transients provides compelling evidence that the principal axis of the rod orientational distribution, the nematic director, undergoes a cascade of transitions and coexistence of periodic states known as kayaking, tumbling, and wagging, before transitioning to steady flow alignment above a critical shear rate.@en

We report irreversible, shear-activated gelation in liquid crystalline solutions of a rigid polyelectrolyte that forms rodlike assemblies (rods) in salt-free solution. At rest, the liquid crystalline solutions are kinetically stable against gelation and exhibit low viscosities. Under steady shear at, or above, a critical shear rate, a physically cross-linked, nematic gel network forms due to linear growth and branching of the rods. Above a critical shear rate, the time scale of gelation can be tuned from hours to nearly instantaneously by varying the shear rate and solution concentration. The shear-activated gels are distinct in their structure and rheological properties from thermoreversible gels. At a fixed concentration, the induction time prior to gelation decreases exponentially with the shear rate. This result indicates that shear-activated thermalization of the electrostatically stabilized rods overcomes the energy barrier for rod-rod contact, enabling rod fusion and subsequent irreversible network formation.@en