The capability of joining two thermoplastic composite parts by welding is a key technology to reduce the weight and cost of assembled parts and enables high volume manufacturing of future aeronautical structures made of thermoplastic composite materials. However, there is not much experimental understanding of the mechanisms involving welded joint failure, and the computational tools available for the simulation of thermoset composites have not yet been completely assessed for thermoplastic materials. In this work, a numerical and experimental evaluation is performed to investigate the strength and failure behavior of conduction welded thermoplastic composite joints. A welded single lap shear joint is designed, manufactured, tested and analyzed proposing two distinct modeling approaches. A simplified modeling strategy which only accounts for damage at the weld is compared to a high-fidelity model which can take into account the physical failure mechanisms at the lamina level. The high-fidelity modeling methodology is able to predict the experimental failure mode of the investigated welded joints with high accuracy and is used to gain new insights into the key-variables that influence the strength of thermoplastic welded joints. It is also found that the joint strength is highly influenced by the failure mechanisms not only of the welded interface but also of the surrounding plies.

In this study, the development of innovative tooling and end-effector systems for the assembly of a multifunctional thermoplastic fuselage is presented. The increasing demand for cleaner and new aircraft requires utilising novel materials and technologies. Advanced thermoplastic composites provide an excellent material option thanks to their weldability, low density, low overall production cost, improved fracture toughness and recyclability. However, to fully appreciate their potentials, new manufacturing approaches and techniques are needed. Hence, this project develops three end-effector solutions to demonstrate the feasibility of assembling a full-scale multifunctional-integrated thermoplastic lower fuselage shell, including the integration of a fully equipped floor and cargo structure. The developed assembly solution comprises three individual yet well-integrated tooling systems that allow housing the skin and assembly; picking, placing and welding of the assembly parts, i.e. clips and stringers; and welding of frames and floor beam sub-assemblies. The process of developing these systems including the end-user requirements, technical challenges, tooling and end-effectors design and manufacturing process are detailed in this paper.