The deployment of offshore wind in the UK has seen a rapid increase in the past decade and will continue to increase with the securement of the recent Scotwind sites. Floating platforms will be utilised for 60% of these new sites, creating opportunities to try new platform typologies and further solidify the validity of existing concepts. Since there is no consensus on the platform typology, the cost will vary; however, it is predicted to be double the price of traditional fixed platforms. Finding the most optimal solution in terms of cost and performance is key to keeping cost low, allowing the technology to be more competitive. A technique which has been used in other industries is multi-objective optimisation, searching a large design space much more quickly than traditional methods. By carrying out a multi-objective approach, the optimal platform geometry can be identified over the Pareto Frontier, considering conflicting objectives such as cost and performance. The aim of this work is to review the existing literature on multi-objective optimisation of floating offshore wind (FOW) platforms, highlighting the gaps and shortfalls in the current literature. This review highlights the majority of work has been carried out for the 5 MW NREL turbine on a SPAR platform, utilising a genetic algorithm. Cost reduction has been noted as the main objective, however, the models found within the literature are simplistic, with a number of assumptions. The overall findings of this work highlight future work that could be improved: cost models, the inclusion of an energy production model linked to the platform motion, the requirement for analysis of larger turbines and the potential for a concept selection tool to reduce computational time.@en

The development and deployment of offshore wind farms in the last decade have seen a dramatic increase, now totalling 743 GW globally (Global Wind Energy Council, 2022). This rapid increase is expected to further continue now with the potential to explore deeper sites with the adoption of floating offshore platforms. Proof of this growth has recently been seen with an impressive 60% of the 25 GW Scotwind leasing sites planning to install floating platforms in the next ten years (Crown estate, 2022 [1,2]). One main disadvantage of the advancement offshore is uncertainty and the potential increase in costs due to more complex structures and greater distances to shore. The cost increase for floating platforms is expected to be two to three times more expensive than traditional fixed support structures (Eric Paya, 2020). Thus, this work aims to review existing analytical cost models found within the literature to best determine their level of accuracy and compare the assumptions which have been made. Leading on from this review, a collection of all data found in the reviewed literature is presented, which leads to a data analysis that determines the variation across literature and the potential causes. Assessing this literature shows a wide range of model considerations, often leading to assumptions with little or no data to be validated against. Hence, high levels of variation and a lack of consensus on the cheapest floating platform were noted. All aspects of costs related to floating offshore wind systems vary heavily throughout the literature.@en

As the UK takes a step towards a greener, cleaner future aiming to be net zero by 2050, continuous development of the power network is required. A clear solution is offshore wind, having already proved its feasibility and success in nearshore sites. However, a large majority of near shore sites in the UK are already being utilised. The next step is to move into deeper waters and utilise the stronger, more consistent wind resources. A solution could be floating offshore wind which is still in its infancy, with only a few operational floating wind farms installed. Building upon the multidisciplinary design, analysis, and optimisation framework (MDAO) for floating offshore wind turbines (FOWT) being developed at the University of Strathclyde, called FEDORA, the aim of this work is to refine the LCoE model adopted by FEDORA, and applying it to perform the optimisation of the floating offshore OC3 SPAR. There is limited data on cost, therefore Hywind Scotland Pilot Park will be used as a basis for the LCoE model, allowing the results to be validated. This model is not restricted to SPARs, as it establishes a general methodology to calculate the life cycle cost of floating offshore wind farms. Utilising the improved cost model this work finds four optimised SPAR structures for four different maximum angles of inclination which can be experienced in the wind turbines operation. The improved cost model has a much higher accuracy, highlighting the initial cost model underestimates the cost of the SPAR structure by around half. @en