The Landing Platform Dock vessel is mainly designed to support amphibious operations in which landing operations play an important role. For operating landing craft the vessel has a well dock at the stern, designed to station several landing craft. Landing operations are restricted by the motions of the Landing Platform Dock vessel and by the motions of the water in the flooded well dock. Due to turbulent flow in the dock entrance and nonlinear wave motions inside the dock, the (dis)embarking procedure can be very hazardous for landing craft. Therefore it is necessary to execute this operation as safe as possible, meaning that the water motions in the well dock should be investigated thoroughly.
The primary objective of this thesis is to investigate how various physical mechanisms, when combined with wave characteristics, influence the flow within the well dock. The wave profile within the dock arises from the interaction of two physical mechanisms: radiation, caused by ship motions, and diffraction, which is observed when the ship remains stationary, causing incoming waves to diffract around its hull. Specifically, this study wants to determine which of the two physical mechanisms radiation or diffraction has a more pronounced influence. Also, it investigates how different wavelengths impact these mechanisms and the results combination of independently analysed mechanisms with a model that integrates both mechanisms from the start of the simulation.
The second objective centers on the development of an accurate and efficient model to capture the physical mechanisms of the flow within the well dock of an LPD. The validation for this model derives from model tests conducted at TU Delft[20].
The third objective focuses on simplifying the model in order to facilitate the design process. Upon validating the model from the second research question, wave kinematics are captured using a wave probe located at the dock entrance. These kinematics are then used as inputs for a 2D model. Notably, this model specifically represents the well dock and the ramp region, excluding the complete ship structure. For validation, the same procedure employed in the second objective is followed, referencing experiments conducted at TU Delft[20].
All Computational Fluid Dynamics (CFD) calculations were executed using the ComFLOW program.