We introduce the design of an array-fed dielectric lens antenna that enables electronic beam steering within a large Field of View (FoV). The feed array consists of eight cavity-backed double-slot antenna elements, fed by a microstrip feed structure that tilts the beam of each double slot toward the lens center. The slots are loaded with a two Artificial Dielectric Layers (ADL) to increase the front-to-back ratio. The elements are placed closer to the lens surface with respect to the nominal focal plane and are combined with proper weights to reduce the scan loss. Metallic reflectors are positioned along the sides of the array edges to further improve the scanning performance, especially at large scan angles. Full-wave simulations show that the designed antenna realizes a stable gain around 20 dBi within a ±50° FoV coverage, for a lens diameter of 5 wavelengths.

This paper presents a distributed radar system architecture designed for sensing applications above 100GHz. The proposed radar system leverages high-gain lens arrays to generate extremely narrow beams, enabling high angular resolution. A hybrid beamforming approach is proposed in both the transmitter and receiver arrays, allowing for continuous scanning across a moderate field of view. Additionally, an ideal estimation of radar range is conducted assuming a simplified radar equation for this architecture, showing its potential to detect targets at very long distances.

In this work we present a fully electronic lens phased array that can continuously scan a moderate field of view of 18° with an angular resolution of ~1°. The fabricated lens array along with its preliminary measurement results are presented in this paper.

We present a freely accessible graphical user interface (GUI) for analyzing antenna-fed quasi-optical (QO) systems in reception (Rx). This analysis is presented here for four widely used canonical QO components: parabolic reflectors and elliptical, extended hemispherical, and hyperbolic lenses. The employed methods are geometrical optics (GO) and Fourier optics (FO). Specifically, QO components are illuminated by incident plane waves. By using a GO-based propagation code, the scattered fields are evaluated at an equivalent sphere centered on the primary focus of the component. The FO methodology is then used to represent the scattered fields over the focal plane as plane wave spectrum. A field correlation between this spectrum and the antenna feed radiating without the QO component is implemented to evaluate the induced open-circuit voltage on the feed in Rx. By performing a field matching between these two spectral fields, feed designers can optimize the broadside and/or steering aperture efficiencies of QO systems in a fast manner. The tool is packaged into a MATLAB GUI, which reports the efficiency terms, directivity, and gain patterns of antenna-coupled QO systems. The described tool is validated via full-wave simulations with excellent agreement.