One-dimensional models for multiphase flow in pipelines are commonly discretised using first-order Finite Volume (FV) schemes, often combined with implicit time-integration methods. While robust, these methods introduce much numerical diffusion depending on the number of grid points. In this paper we propose a high-order, space-time Discontinuous Galerkin (DG) Finite Element method with h-adaptivity to improve the efficiency of one-dimensional multiphase flow simulations. For smooth initial boundary value problems we show that the DG method converges with the theoretical rate and that the growth rate and phase shift of small, harmonic perturbations exhibit superconvergence. We employ two techniques to accurately and efficiently represent discontinuities. Firstly artificial diffusion in the neighbourhood of a discontinuity suppresses spurious oscillations. Secondly local mesh refinement allows for a sharper representation of the discontinuity while keeping the amount of work required to obtain a solution relatively low. The proposed DG method is shown to be superior to FV.@en

During the design phase of an offshore wind turbine, it is required to assess the impact of loads on the turbine life time. Due to the varying environmental conditions, the effect of various uncertain parameters has to be studied to provide meaningful conclusions. Incorporating such uncertain parameters in this regard is often done by applying binning, where the probability density function under consideration is binned and in each bin random simulations are run to estimate the loads. A different methodology for quantifying uncertainties proposed in this work is polynomial interpolation, a more efficient technique that allows to more accurately predict the loads on the turbine for specific load cases. This efficiency is demonstrated by applying the technique to a power production test problem and to IEC Design Load Case 1.1, where the ultimate loads are determined using BLADED. The results show that the interpolating polynomial is capable of representing the load model. Our proposed surrogate modeling approach therefore has the potential to significantly speed up the design and analysis of offshore wind turbines by reducing the time required for load case assessment.@en

The present paper is focused on the development of an accurate 1D numerical model for pig motion in two-phase flow. The focus will be on the liquid slug that is accumulated in front of the pig, the so-called pig-generated slug. Under the assumption of a stratified flow, we first discuss the academic case of liquid slug accumulation where we neglect the viscosity of the fluids. The size of the liquid slug will then effectively be determined by the speed of the hydrostatic wave which runs ahead of the pig. We also consider the more realistic case which includes the viscosity of the fluid. Finally, we discuss the effect of the presence of a by-pass in the pig on the accumulated liquid slug.@en