This work compares the ability of different numerical modelling approaches to simulate the out-of-plane behaviour of two-leaf stone masonry walls with different masonry bond configurations: an irregular drystone stone masonry wall and a masonry wall with roughly cut regular stone units. Finite element modelling, considering both a micro and macro-modelling approach, and the distinct element method have been compared in this study, which intends to (i) provide an insight regarding parameter estimation and the calibration procedure for each modelling approach considered; (ii) highlight their pros and cons of the selected modelling strategies; (iii) further expand the existing literature addressing the numerical modelling of two-leaf stone masonry walls.

@en

Masonry is one of the most used construction materials for structural and non-structural elements. The number of masonry constructions is still remarkable in countries where the costs of modern technology are high, as masonry solutions remain the most convenient and economical alternatives. Among these countries, unreinforced masonry is usually found in low- and mid-rise buildings, both residential and commercial. Developed countries, however, have favored alternative construction materials like reinforced concrete and steel, while masonry is regarded as an aesthetic and non-structural feature. Most objections to masonry construction are based on its lack of seismic performance. However, a substantial number of well- preserved masonry structures demonstrate that when they are built properly, they can withstand any form of loading, such as wind or seismic loads. Thus, masonry buildings’ seismic performance is underrated and experimental research is necessary to gain insight into their response. The studies available in the literature mainly focus on shake table testing of masonry buildings, while they have not been extensively studied in a quasistatic regimen. In this context, a half-scale two-story unreinforced masonry building with plan irregularity has been tested at the Laboratory of the Structures at the University of Minho. The experimental campaign involves cyclic quasi-static testing with a mode proportional unidirectional loading. Dynamic identification and digital image correlation techniques have been employed to monitor the damage progression. The test has resulted in a rocking response under lateral loading, with a wall detachment from the foundation and slab in the first and second levels, respectively. This paper presents and discusses the experimental procedure and the main outcomes of the study.@en

Performance-based design plays a significant role in the structural and earthquake engineering community to ensure both safety and economic feasibility. Its application to masonry building design/assessment is limited and requires straightforward rules considering the characteristics of masonry behavior. Nonlinear static procedures mainly cover regular frame system structures, and their application to both regular and irregular masonry buildings require further investigation. The present paper addresses two major issues: (i) the definition of irregularity in masonry buildings, and (ii) the applicability of classical nonlinear static procedures to irregular masonry buildings. It is observed that the irregularity definition is not comprehensive and has different descriptions among the seismic codes as well as among researchers, particularly in the case of masonry buildings. The lack of global language may result in the misuse of the procedures, while adjustments may be essential due to irregularity effects. Therefore, irregularity indices given by different codes and research studies are discussed. Furthermore, an overview of nonlinear static procedures implemented within the framework of the performance-based approach and improvements proposed for its application in masonry buildings is presented.@en

This paper presents and discusses the selection of a set of core indicators for the sustainable conservation of built heritage. This core set of indicators was selected by following a two-step methodology: 1) first, a comparative analysis of indicators of two building sustainability assessment (BSA) tools with different approaches was performed by using content analysis to identify common priorities; 2) second, a selection of the indicators according to scale, stage of the life cycle, and coverage of core aspects for sustainable development, following the criteria established by the International Organization for Standardization. The results show that even if current methodologies have different structures, terminology, and priorities, they share common principles that promote a more sustainable built environment. However, by being mostly oriented to the intervention and operation phases, these methods do not have direct application as an assessment framework for the sustainable conservation of the built heritage. To overcome this situation, this research presents a concise set of indicators that can support the development of an assessment tool to ensure the sustainable conservation of existing buildings.

@en

The present paper addresses the seismic performance of a half-scale two-story unreinforced masonry (URM) building with structural irregularity in plan and in elevation. The main objectives are (i) to understand the seismic response of URM buildings with torsional effects, and (ii) to evaluate the reliability of using simplified approaches for irregular masonry buildings. For this purpose, nonlinear static analyses are carried out by using three different modeling approaches, based on a continuum model, beam-based and spring-based macro-element models. The performance of each approach was compared based on capacity curves and global damage patterns. Reasonable agreement was found between numerical predictions and experimental observations. Validation of simplified approaches was generally provided with reference to regular structures but, based on the differences in the base shear capacity found here, it appears that structural irregularities are important to be taken into account for acquiring higher accuracy on simplified methods when torsion is present.@en