Repair mortars are costly materials with high level of Portland cement and various additives which questions their eco-efficiency. In this respect, cement free material solutions such as alkali-activated mortars based on ground granulated blast furnace slag (BFS) are gaining interest for structural repair. The aim of this research is to study blast furnace slag as a precursor for producing ambient cured alkali-activated repair mortars. To achieve this purpose, a total of four mixtures were prepared using four different molar ratios of the silicate solution. The fresh and hardened properties of the produced mortars including flow retention, dry density, compressive and flexural strength are studied comparing ambient-cured and sealedcured specimens. Furthermore, the tensile bond strength between the repair mortars and a grit blasted concrete substrate was verified (after 7 days sealed + 21 days ambient curing). The results demonstrate, for the tested configurations, the feasibility of the alkali-activated repair mortar, including a good adherence. Given the limited scope of the tests, more work is needed to confirm the observations further.