CJ
Christopher Juhlin
info
Please Note
<p>This page displays the records of the person named above and is not linked to a unique person identifier. This record may need to be merged to a profile.</p>
3 records found
1
Review
(2021)
-
Bojan Brodic, Alireza Malehmir, Nelson Pacheco, Christopher Juhlin, Joao Carvalho, Lars Dynesius, Jens Van Den Berg, Richard De Kunder, George Donoso, More authors...
To evaluate and upscale the feasibility of using exploration tunnels in an operating mine for active-source seismic imaging, a seismic experiment was conducted at the Neves-Corvo mine, in southern Portugal. Four seismic profiles were deployed in exploration drifts approximately 650 m beneath the ground surface, above the world-class Lombador volcanogenic massive sulfide deposit. In addition to the tunnel profiles, two perpendicular surface seismic profiles were deployed above the exploration tunnels. The survey was possible due to a newly developed prototype global positioning system (GPS) time transmitter enabling accurate GPS synchronization of cabled and nodal seismic recorders, below and on the surface. Another innovative acquisition aspect was a 1.65 t broadband, linear synchronous motor (LSM) driven - electric seismic vibrator (e-vib) used as the seismic source along two of the exploration tunnels. We have evaluated the challenges and innovations necessary for active-source tunnel seismic acquisition, characterized by high levels of vibrational noise from the mining activities. In addition, we evaluated the LSM vibrator's signal and overall seismic-data quality in this hard rock mining environment. Our processing results from the tunnel data and 3D reflection imaging of the Lombador deposit below the exploration tunnels were checked for consistency through constant-velocity 3D ray-tracing traveltime forward modeling. For imaging purposes, 3D Kirchhoff prestack depth and poststack time-migration algorithms were used, with both successfully imaging the targeted deposit. The results obtained show that active-source-seismic imaging using subsurface mining infrastructure of operational mines is possible. However, it requires innovative exploration strategies, a broadband seismic source, an accurate GPS-time system capable of transmitting GPS-time hundreds of meters below the surface, and careful processing. The results obtained open up possibilities for similar studies in different mining or tunneling projects.
...
To evaluate and upscale the feasibility of using exploration tunnels in an operating mine for active-source seismic imaging, a seismic experiment was conducted at the Neves-Corvo mine, in southern Portugal. Four seismic profiles were deployed in exploration drifts approximately 650 m beneath the ground surface, above the world-class Lombador volcanogenic massive sulfide deposit. In addition to the tunnel profiles, two perpendicular surface seismic profiles were deployed above the exploration tunnels. The survey was possible due to a newly developed prototype global positioning system (GPS) time transmitter enabling accurate GPS synchronization of cabled and nodal seismic recorders, below and on the surface. Another innovative acquisition aspect was a 1.65 t broadband, linear synchronous motor (LSM) driven - electric seismic vibrator (e-vib) used as the seismic source along two of the exploration tunnels. We have evaluated the challenges and innovations necessary for active-source tunnel seismic acquisition, characterized by high levels of vibrational noise from the mining activities. In addition, we evaluated the LSM vibrator's signal and overall seismic-data quality in this hard rock mining environment. Our processing results from the tunnel data and 3D reflection imaging of the Lombador deposit below the exploration tunnels were checked for consistency through constant-velocity 3D ray-tracing traveltime forward modeling. For imaging purposes, 3D Kirchhoff prestack depth and poststack time-migration algorithms were used, with both successfully imaging the targeted deposit. The results obtained show that active-source-seismic imaging using subsurface mining infrastructure of operational mines is possible. However, it requires innovative exploration strategies, a broadband seismic source, an accurate GPS-time system capable of transmitting GPS-time hundreds of meters below the surface, and careful processing. The results obtained open up possibilities for similar studies in different mining or tunneling projects.
Preface
Special issue from the Division on Energy, Resources and the Environment at EGU2020: Sharing geoscience online
Review
(2020)
-
Sonja Martens, Maren Brehme, Viktor J. Bruckman, Christopher Juhlin, Johannes Miocic, Antonio P. Rinaldi, Michael Kühn
Since 2004, the European Geosciences Union (EGU) brings together experts from all over the world into one annual event covering all disciplines of the Earth, planetary and space sciences. This special issue in Advances in Geosciences comprises a collection of contributions from the Division on Energy, Resources and the Environment (ERE) which were presented at EGU2020: Sharing Geoscience Online.
...
Since 2004, the European Geosciences Union (EGU) brings together experts from all over the world into one annual event covering all disciplines of the Earth, planetary and space sciences. This special issue in Advances in Geosciences comprises a collection of contributions from the Division on Energy, Resources and the Environment (ERE) which were presented at EGU2020: Sharing Geoscience Online.
Journal article
(2019)
-
Joachim Place, Deyan Draganov, Alireza Malehmir, Christopher Juhlin, Chris Wijns
Exhumation of crust exposes rocks to weathering agents that weaken the rocks’ mechanical strength. Weakened rocks will have lower seismic velocity than intact rocks and can therefore be mapped using seismic methods. However, if the rocks are heavily weathered, they will attenuate controlled-source seismic waves to such a degree that the recorded wavefield would become dominated by ambient noise and/or surface waves. Therefore, we have examined the structure of differential weathering by first-break traveltime tomography over a seismic profile extending approximately 3.5 km and acquired at a mining site in Zambia using explosive sources and a source based on the swept-impact seismic technique (SIST). Seismic interferometry has been tested for the retrieval of supervirtual first arrivals masked by uncorrelated noise. However, use of crosscorrelation in the retrieval process makes the method vulnerable to changes in the source signal (explosives and SIST). Thus, we have developed a crosscoherence-based seismic-interferometry method to tackle this shortcoming. We investigate the method’s efficiency in retrieving first arrivals and, simultaneously, correctly handling variations in the source signal. Our results illustrate the superiority of the crosscoherence- over crosscorrelation-based method for retrieval of the first arrivals, especially in alleviating spurious ringyness and in terms of the signal-to-noise ratio. These benefits are observable in the greater penetration depth and the improved resolution of the tomography sections. The tomographic images indicate isolated bodies of higher velocities, which may be interpreted as fresh rocks embedded into a heavily weathered regolith, providing a conspicuous example of differential weathering. Our study advances the potential of seismic methods for providing better images of the near surface (the critical zone).
...
Exhumation of crust exposes rocks to weathering agents that weaken the rocks’ mechanical strength. Weakened rocks will have lower seismic velocity than intact rocks and can therefore be mapped using seismic methods. However, if the rocks are heavily weathered, they will attenuate controlled-source seismic waves to such a degree that the recorded wavefield would become dominated by ambient noise and/or surface waves. Therefore, we have examined the structure of differential weathering by first-break traveltime tomography over a seismic profile extending approximately 3.5 km and acquired at a mining site in Zambia using explosive sources and a source based on the swept-impact seismic technique (SIST). Seismic interferometry has been tested for the retrieval of supervirtual first arrivals masked by uncorrelated noise. However, use of crosscorrelation in the retrieval process makes the method vulnerable to changes in the source signal (explosives and SIST). Thus, we have developed a crosscoherence-based seismic-interferometry method to tackle this shortcoming. We investigate the method’s efficiency in retrieving first arrivals and, simultaneously, correctly handling variations in the source signal. Our results illustrate the superiority of the crosscoherence- over crosscorrelation-based method for retrieval of the first arrivals, especially in alleviating spurious ringyness and in terms of the signal-to-noise ratio. These benefits are observable in the greater penetration depth and the improved resolution of the tomography sections. The tomographic images indicate isolated bodies of higher velocities, which may be interpreted as fresh rocks embedded into a heavily weathered regolith, providing a conspicuous example of differential weathering. Our study advances the potential of seismic methods for providing better images of the near surface (the critical zone).