Membrane technology has attracted great industrial interest in carbon capture and separation owing to the merits of energy-efficiency, environmental friendliness and low capital investment. Conventional polymeric membranes for CO2 separation suffer from the trade-off between permeability and selectivity. Introducing porous fillers in polymers is one approach to enhance membrane separation performance. Metal-organic frameworks (MOFs), with ordered porous structure and diverse chemical functionalities, are promising fillers to prepare mixed matrix membranes (MMMs) for CO2 separation. However, the main issue of MOF based MMMs in industry is their stability and processability. This review analyses recent work on stable and scalable MOF based MMMs for CO2 separation. The typical stable MOFs, MOF-based MMMs and the scalable MOF synthesis are summarized. A large number of MOF-based MMM suffer from instability upon exposure to contaminants. For that reason, we also discuss the use of covalent organic frameworks (COFs) as an alternative to prepare MMMs for CO2 separation, considering their excellent stability and good compatibility with polymers. Finally, a brief conclusion and current challenges on obtaining scalable and stable MMMs are outlined. This review may provide some guidance for designing high performance MMMs for industrial CO2 capture and separation to help achieving carbon neutrality.@en

One of the major issues encountered in the Post Combustion CO2 Capture processes is the degradation of the solvent which can be in great part attributed to the presence of oxygen in the solution. The present report focuses on the demonstration of DORA (Dissolved Oxygen Removal Apparatus), a technology developed by TNO as a counter-measure of oxidative degradation. The DORA was first operated in combination with TNO's mobile bench-scale CO2 capture pilot (5 Nm3/h flue gas capacity) with artificial flue gas, showing an instant drop of 15% and an overall reduction of approximately 70% in the ammonia emissions from the absorber, which is an indication of reduced degradation. The technology was also demonstrated using the same pilot in an industrial environment in collaboration with the facility PlantOne bringing DORA from TRL5 to TRL6. This campaign proved that DORA contributed to the deacceleration of solvent degradation. The tests were executed with a porous membrane, and it was observed that exposure to degraded solvents led to solvent leakage through this membrane. Therefore, the use of a coated membrane was proposed to optimize the operation and increase oxygen removal. The use of this membrane is demonstrated at TRL3. Along with that, a model was developed to determine mass transfer resistances and the membrane area required to remove different levels of dissolved oxygen.@en