In the phase of oil drilling, mud filtrate penetrates into porous formations and alters the pore fluid properties. This complicates well logging exploration, and inevitably gives rise to shift in reservoir estimation. Logging engineers deem mud invasion a harm and attempt to eliminate its impact on logging data exploration. However, from our point of view, the mudcontaminated parts of the formation do also carry some valuable information, notably with regard to the key hydraulic properties. Therefore, if adequately characterized, mud invasion effects, in turn, could be utilized for reservoir estimation. Typically, the invasion depth critically depends on the formation porosity and permeability. To achieve this objective, we propose to use borehole radar to determine the mud invasion depth considering a high spatial resolution of ground-penetrating radar (GPR) compared with the conventional logging tools. We implement numerical investigations on the feasibility of this approach by coupling electromagnetic (EM) modelling with fluid flow modelling in an oil-bearing formation disturbed by mud invasion effects. The simulations imply that a time-lapse radar logging is able to extract EM reflection signals from mud invasion front, and the invasion depth and EM velocity can be obtained by a downhole antenna displacement of one source and two receivers. We find that there exists a positive correlation between the estimated invasion depth and permeability curves, and a negative correlation between the estimated velocity and porosity curves. We suggest that borehole radar has potential to estimate permeability and porosity of oil reservoirs, wherein the mud invasion effect is positively utilized. The study demonstrates a potential method of oil reservoir estimation and a novel application of GPR in oil fields @en

In hydrocarbon drilling, mud filtrate penetrates permeable formations and alters the pore fluid characteristics in the immediate vicinity of the borehole. Typically, the prevailing in situ pore fluids are displaced by the invading mud filtrate, which leads to gradually changing distributions of the fluid and electrical properties. Understanding this invasion process is crucial for the interpretation of logging data and associated reservoir evaluations. Conventional logging methods tend to be inadequate for this purpose as their resolution is too low. We find that invasion depth can be determined from borehole radar data using an optimized antenna configuration and time-lapse measurements. A series of parametric sensitivity analyses provide information about the effects of variations of the rock and fluid properties on the identification and extraction of borehole radar signals reflected from the invasion front. Our results suggest that by embedding the radar antennas in cavities filled with an absorbing dielectric material, it is possible to minimize the interference arising from the metal components of the logging tool. In the simulated reservoir scenario, a time-lapse measurement mode with a time interval of at least 6 h can reliably extract the radar signals reflected from the invasion front, and the proposed borehole radar has a lateral detection range from 0.15 to 1 m. A comprehensive range of parametric sensitivity analyses indicates that the signals reflected from the invasion front are principally influenced by oil viscosity, porosity, and mud and formation water salinity, as well as by molecular diffusion coefficient and cementation exponent. These properties and parameters should be carefully explored and assessed when applying borehole radar to evaluate mud invasion information in a reservoir environment. @en

A regression model is developed in order to estimate in real time the signal-to-clutter ratio (SCR) for landmine detection using ground-penetrating radar. Artificial neural networks are employed in order to express SCR with respect to the soil's properties, the depth of the target, and the central frequency of the pulse. The SCR is synthetically evaluated for a wide range of diverse and controlled scenarios using the finite-difference time-domain method. Fractals are used to describe the geometry of the soil's heterogeneities as well as the roughness of the surface. The dispersive dielectric properties of the soil are expressed with respect to traditionally used soil parameters, namely, sand fraction, clay fraction, water fraction, bulk density, and particle density. Through this approach, a coherent and uniformly distributed training set is created. The overall performance of the resulting nonlinear function is evaluated using scenarios which are not included in the training process. The calculated and the predicted SCR are in good agreement, indicating the validity and the generalization capabilities of the suggested framework.@en

In oil drilling, mud filtrate penetrates into porous formations and alters the compositions and properties of the pore fluids. This disturbs the logging signals and brings errors to reservoir evaluation. Drilling and logging engineers therefore deem mud invasion as undesired and attempt to eliminate its adverse effects. However, the mud-contaminated formation carries valuable information, notably with regard to its hydraulic properties. Typically, the invasion depth critically depends on the formation porosity and permeability. Therefore, if adequately characterized, mud invasion effects could be used for reservoir evaluation. To pursue this objective, we have applied borehole radar to measure mud invasion depth considering its high radial spatial resolution compared with conventional logging tools, which then allows us to estimate the reservoir permeability based on the acquired invasion depth. We investigate the feasibility of this strategy numerically through coupled electromagnetic and fluid modeling in an oil-bearing layer drilled using freshwater-based mud. Time-lapse logging is simulated to extract the signals reflected from the invasion front, and a dual-offset downhole antenna mode enables time-to-depth conversion to determine the invasion depth. Based on drilling, coring, and logging data, a quantitative interpretation chart is established, mapping the porosity, permeability, and initial water saturation into the invasion depth. The estimated permeability is in a good agreement with the actual formation permeability. Our results therefore suggest that borehole radar has significant potential to estimate permeability through mud invasion effects.@en

Editorial@en