SR

S. Regondi

info

Please Note

1 records found

Design and fabrication of a prototype in collaboration with Kaneka Corporation

Master thesis (2017) - Simone Regondi, Rudi Santbergen, Olindo Isabella, Miro Zeman
Among the advantages of crystalline silicon hetero-junction (SHJ) there is the possibility to use a thin c-Si wafer that is bendable, but still has a power conversion efficiency higher than commercially avail- able thin film (TF) modules. Nowadays, all the photovoltaic applications on curved surfaces use TF technologies, however their low power conversion efficiency requires a large area, which is not always available. Therefore, the entry of SHJ technology in the environment-integrated applications will de- crease the required PV area being a competitor of TF wherever the surface available is scarce and the the shape curved and not complex.

A structure that would benefit the advent of SHJ modules is the infotainment spot, which is a solar- powered device that provides useful information and entertainment to the user through an interactive screen. Such a device was realized for the first time by Weeda et al. [1] in TUDelft, but the CIGS module that powered the device made the structure bulky, unattractive and unwieldy. In this thesis the experience of Kaneka Corp., which holds the world’s record of highest conversion efficiency for c-Si hetero-junction, was used to design the PV module that powers the stand-alone system of a new infotainment spot.

In order to calculate the irradiation on the surface of the infotainment spot the Optical Model developed by Santbergen et al. [2] was used because allows flexibility in choosing the design and the location separately. However, this model does not include the surrounding, thus in this thesis three new ap- proaches to include the influence of the surrounding environment were proposed and validated through experimental measurements. Moreover, two of these new approaches have the possibility to study the irradiance also in indoor places. After that, its power was simulated knowing the irradiance values, the temperature of the PV module, computed with a thermal-energy balance, and other meteorological data. Lastly, a load profile was developed to simulate the system performance throughout the year. All these information served to find the best pair of number of SHJ cells to interconnect and battery capacity and basically it is a trade-off between system reliability and system size. The study indicated that in Osaka the infotainment spot would need 42 series connected half-cut solar cells that power a 12 푉 system with a storage capacity of 150 퐴ℎ in order to make the system completely autonomous and operable the whole year. The thesis ended with a working prototype of the Solar-Powered Infotainment Spot 2.0. ...