Human joint admittance changes with numerous factors constituting the operational point. For large changes of the operational point, joint admittance can be identified using Linear Time-Varying methods on torque and angular position signals measured on human joints. Out of the available methods, the Skirt Decomposition method was selected due to its nonparametric structure and the limited number of a priori assumptions it makes. Its employment on the identification of human joint admittance was completely novel. The method was applied to a simulation model representing joint admittance and on experimental data measured from the wrist joint. In the experiment, the subjects were changing the applied torque to follow a desired trajectory, while the angle of the wrist was perturbed by the manipulator.With a properly designed multisine input, taking into consideration the speed and complexity of the time variation, a variance accounted for (VAF) close to 100 % was obtained in the simulation study on all the tested conditions. From the experiment, it was seen that the contribution of the time variation in the frequency domain was partially masked by the output noise. The noise level could be decreased by lowering the amplitude of the desired torque, and by removing the voluntary torque from the analyzed data. With a desired torque level ranging between 5% and 20%, and considering the bandwidth between 2 Hz and 20 Hz, the mean power of the output residuals in the frequency domain ranged between 16.2 and 27.1 for all the tested conditions. Furthermore, the time-varying dynamics retrieved from the system function showed a clear correlation with the desired torque trajectory.