<p>This page displays the records of the person named above and is not linked to a unique person identifier. This record may need to be merged to a profile.</p>
Journal article(2025)
-
G. Galanopoulos, Shweta Paunikar, Giannis Stamatelatos, Theodoros Loutas, Nazih Mechbal, Marc Rébillat, D. Zarouchas
Composite engine fan blades are critical aircraft engine components, and their failure can compromise the safe and reliable operation of the entire aircraft. To enhance aircraft availability and safety within a condition-based maintenance framework, effective methods are needed to identify damage and monitor the blades’ condition throughout manufacturing and operation. This paper presents a unique experimental framework for real-time monitoring of composite engine blades utilizing state-of-the-art structural health monitoring (SHM) technologies, discussing the associated benefits and challenges. A case study is conducted on a representative Foreign Object Damage (FOD) panel, a substructure of a LEAP (Leading Edge Aviation Propulsion) engine fan blade, which is a curved, 3D-woven Carbon Fiber Reinforced Polymer (CFRP) panel with a secondary bonded steel leading edge. The loading scheme involves incrementally increasing, cyclic 4-point bending (loading–unloading) to induce controlled damage growth, simulating in-operation conditions and allowing evaluation of flexural properties before and after degradation. External damage, simulating foreign object impact common during flight, is introduced using a drop tower apparatus either before or during testing. The panel’s condition is monitored in-situ and in real time by two types of SHM sensors: screen-printed piezoelectric sensors for guided ultrasonic wave propagation studies and surface-bonded Fiber Bragg Grating (FBG) strain sensors. Experiments are conducted until panel collapse, and degradation is quantified by the reduction in initial stiffness, derived from the experimental load-displacement curves. This paper aims to demonstrate this unique experimental setup and the resulting SHM data, highlighting both the potential and challenges of this SHM framework for monitoring complex composite structures, while an attempt is made at correlating SHM data with structural degradation.
...
Composite engine fan blades are critical aircraft engine components, and their failure can compromise the safe and reliable operation of the entire aircraft. To enhance aircraft availability and safety within a condition-based maintenance framework, effective methods are needed to identify damage and monitor the blades’ condition throughout manufacturing and operation. This paper presents a unique experimental framework for real-time monitoring of composite engine blades utilizing state-of-the-art structural health monitoring (SHM) technologies, discussing the associated benefits and challenges. A case study is conducted on a representative Foreign Object Damage (FOD) panel, a substructure of a LEAP (Leading Edge Aviation Propulsion) engine fan blade, which is a curved, 3D-woven Carbon Fiber Reinforced Polymer (CFRP) panel with a secondary bonded steel leading edge. The loading scheme involves incrementally increasing, cyclic 4-point bending (loading–unloading) to induce controlled damage growth, simulating in-operation conditions and allowing evaluation of flexural properties before and after degradation. External damage, simulating foreign object impact common during flight, is introduced using a drop tower apparatus either before or during testing. The panel’s condition is monitored in-situ and in real time by two types of SHM sensors: screen-printed piezoelectric sensors for guided ultrasonic wave propagation studies and surface-bonded Fiber Bragg Grating (FBG) strain sensors. Experiments are conducted until panel collapse, and degradation is quantified by the reduction in initial stiffness, derived from the experimental load-displacement curves. This paper aims to demonstrate this unique experimental setup and the resulting SHM data, highlighting both the potential and challenges of this SHM framework for monitoring complex composite structures, while an attempt is made at correlating SHM data with structural degradation.
Journal article(2024)
-
Shweta Paunikar, G. Galanopoulos, Marc Rébillat, Ingo Wirth, Eric Monteiro, Pierre Margerit, Nazih Mechbal
The work presented here focuses on the structural health monitoring (SHM) of a foreign object damage (FOD) composite panel equipped with an innovative printed piezoelectric transducer network. The 3D woven composite FOD panel measures approximately 800 mm × 320 mm, is curved with a cross-sectional thickness varying from approximately 2 mm to 12 mm, and a stainless-steel leading edge is bonded at one of its sides. The core idea explored here is to rely on an innovative screen-printing technology to print a full piezoelectric transducer a flowing to successfully achieve SHM on such a complex composite structure. This work is being carried out within the European project MORPHO - H2020. After printing a 25 elements PZT network, a four points bending fatigue experimental campaign using the PZT network along with other sensor technologies (embedded optical fibres with FBG sensors and acoustic emission sensors) is carried out. This unique experimental campaign allows to generate data and will help to develop diagnostic and prognostic methodologies for remaining life estimation and SHM of the FOD panel. It is demonstrated here through impedance measurements that the printing process associated with the printed PZT transducers is highly repeatable thus validating its use at a larger industrial scale. Furthermore, the printed piezoelectric transducers a re shown to be able to detect foreign object impact and sense Lamb waves signals. This innovative printing technology for PZT transducers network is thus extremely promising. It is furthermore highly advantageous to use the printed transducers for SHM instead of regular ceramic ones as this technology is non-intrusive, add negligible weight, can be printed during the manufacturing process, and arrays of transducers ensure easy availability of another transducer in case of failure of one.
...
The work presented here focuses on the structural health monitoring (SHM) of a foreign object damage (FOD) composite panel equipped with an innovative printed piezoelectric transducer network. The 3D woven composite FOD panel measures approximately 800 mm × 320 mm, is curved with a cross-sectional thickness varying from approximately 2 mm to 12 mm, and a stainless-steel leading edge is bonded at one of its sides. The core idea explored here is to rely on an innovative screen-printing technology to print a full piezoelectric transducer a flowing to successfully achieve SHM on such a complex composite structure. This work is being carried out within the European project MORPHO - H2020. After printing a 25 elements PZT network, a four points bending fatigue experimental campaign using the PZT network along with other sensor technologies (embedded optical fibres with FBG sensors and acoustic emission sensors) is carried out. This unique experimental campaign allows to generate data and will help to develop diagnostic and prognostic methodologies for remaining life estimation and SHM of the FOD panel. It is demonstrated here through impedance measurements that the printing process associated with the printed PZT transducers is highly repeatable thus validating its use at a larger industrial scale. Furthermore, the printed piezoelectric transducers a re shown to be able to detect foreign object impact and sense Lamb waves signals. This innovative printing technology for PZT transducers network is thus extremely promising. It is furthermore highly advantageous to use the printed transducers for SHM instead of regular ceramic ones as this technology is non-intrusive, add negligible weight, can be printed during the manufacturing process, and arrays of transducers ensure easy availability of another transducer in case of failure of one.
