Smart actuators, made of smart materials, are becoming more attractive in many applications because smart materials are not subjected to wear and does not require lubrication during services. Piezoelectric materials are a group of the many attractive smart materials that are being investigated for many applications today. Piezoelectric materials show fast responses, high efficiency/accuracy and operate on a large bandwidth. Composite materials are of interest because of their design flexibility and because they are lighter than other materials commonly used in aircraft and other applications. For the research reported here, a piezoelectric material was embedded in a composite material to form a piezoelectric composite actuator. This research was conducted to expand our knowledge of piezoelectric composite material actuators, and originated from the need to control air flow separation over an airfoil. There is a need to build a profound knowledge about such actuators before they can be implemented in an airfoil, and to understand which parameters influence the behaviour of piezoelectric composite material actuators under static and dynamic operating conditions. The actuators were manufactured and tested under static and dynamic conditions and the experimental results were compared to the finite element models. The models were incorporated with piezoelectric material properties that were determined experimentally. The results showed that a piezoelectric material’s response to an input stimulant, e.g. electric voltage and frequency, influences the actuator’s behaviour.